8×12 Firewood Shed Roof Plans – 4 Cord

This step by step diy project is about 8×12 4 cord firewood shed roof plans. This is PART 2 of the small firewood shed project, where I show you how to build lean to roof and how to attach the side wall panels. See the rest of my firewood shed free plans HERE. Take a look over the rest of my woodworking plans, if you want to get more building inspiration. Premium Plans for this project available in the Shop.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day.

Projects made from these plans

8×12 Firewood Shed Roof Plans

Building-a-8×12-firewood-shed

Cut & Materials Lists

• UNLOCK  LISTS

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One day

Related

• Firewood Shed Plans

Make sure you follow me on Facebook to be the first that gets our latest plans and for some other exclusive content. Also, follow me on Pinterest to get many ideas for your backyard from all the internet! Check out our YouTube channel! See how you can Support  Me with no extra costs to you. 

How to build a lean to wood shed roof

Rafters—8×12-wood-storage

Use 2×6 lumber for the rafters. Mark the cut lines on the beams and then get the job done with a circular saw. Smooth the edges flush. You need the birdsmouth cuts to lock the rafters into place easily.

Fitting-the-rafters—8×12-wood-shed

Fit the rafters to the support beams. Place the supports every 16″ on center. Use rafter ties and 1 1/2″ structural screws to secure the rafters into place tightly.

Fitting-the-purlins

Fit the 1×4 purlins to the top of the shed. Place the purlins every 16″ on center.  Notice the 6″ overhangs on both sides. Use 1 5/8″ screws to secure the slats to the rafters, after drilling pilot holes.

8×12-firewood-shed-plans—overall-dimensions

Next, attach the metal roof sheets to the top of the firewood shed. Align the edges and secure the sheets to the purlins with 3/4″ roofing screws, or the size recommended for the roofing sheets you get. See PART 1 of the project to learn how to build the frame of the shed.

8×12 firewood shed plans – diy

8×12 firewood shed plans – side view

This 8×12 wood shed is large and it can store up to 4 cords of wood. This lean to shed is sturdy and cheap to build. The cost to benefit ratio is very good. You should also check out my 3 cord firewood shed plans. I have many design ideas on this blog, so make sure you take a look over all the alternatives before taking a decision. Premium Plans for this project available in the Shop.

This woodworking project was about 8×12 wood shed roof plans. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

- EXPLORE MORE IDEAS FOR -