Home Shed 4×6 Double Shed Door Plans

4×6 Double Shed Door Plans

by Ovidiu
1.2K views 7 minutes read


This step by step diy project is about 4×6 shed doors and trims plans. This is PART 3 of the 4×6 lean to storage shed project, where I show you how to build the double doors for the storage shed and how to fit the decorative trims. Take a look over the rest of my woodworking plans, if you want to get more building inspiration.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in a few day. See all my Premium Plans HERE.



Projects made from these plans




4×6 Double Shed Door Plans




Cut & Shopping Lists

  • – 2 pieces of 1×4 lumber – 81 1/2″ long, 1 piece – 55″ long JAMBS
  • K – 2 pieces of 1×4 lumber – 70 3/4″ long, 2 pieces – 24″ long, 1 piece – 16 1/2″ long, 1 piece of T1-11 siding – 24″x77 3/4″ long 2xDOOR
  • L – 2 pieces of 1×4 lumber – 111″ long, 2 pieces – 89″ long, 2 pieces – 87 3/4″ long, 2 pieces – 41 3/4″ long TRIMS


 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses


 One day




Building shed doors



Fit the 1×4 trims around the door opening. Align the edges and insert 2 1/2″ screws to lock them into place tightly.



Build the door panels from T1-11 siding and the trims from 1×4 lumber. Use 1 1/4 screws to lock the panels to the trims. Add glue to the joints and align the edges flush.

Fitting the double doors

Fitting the double doors

Fit the doors to the opening and align the edges flush. Attach hinges to lock the door to the jambs. Install a latch to lock the door tightly.

Side wall trims

Side wall trims

Fit the 1×4 trims to the sides of the shed. Align the edges with attention and insert 8d nails to lock the trims into place tightly.

Front wall trims

Front wall trims

Fit the 1×4 trims to the front of the shed. Align the edges with attention and insert 8d nails, to lock them into place tightly.

4x6 Lean to Shed

4×6 Lean to Shed

Last but not least, you need take care of the finishing touches. Fill the holes with wood putty and then smooth the surface with 120-220 grit sandpaper. Apply a few coats of paint or stain to the components, so you can protect them from decay and so you can enhance the look of the shelter. Check out PART 1 and PART 2 of the shed, so you can learn everything you need to know about building the floor, walls and roof for the shed.



This woodworking project was about shed doors plans. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.







You may also like

Leave a Comment