4x6 1 Cord Firewood Shed Plans

This step by step diy project is about 4×6 1 cord firewood shed plans. If you are in search for shed plans so you can store safely 1 cord of wood, this shelter might be the answer to your problems. This wood shed is sturdy and it features a lean to roof with a large opening to the front. See the rest of my firewood shed free plans HERE. Take a look over the rest of my woodworking plans, if you want to get more building inspiration. Premium Plans for this project available in the Shop.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day.

Projects made from these plans

4×6 1 Cord Firewood Shed Plans

Building-a-1-cord-woodshed

Cut & Shopping Lists

A – 2 pieces of 2×6 lumber – 72″ long, 6 pieces – 45″ long FLOOR FRAME
B – 2 pieces of 4×4 lumber – 72″ long SKIDS
C – 11 pieces of 2×4 lumber – 72″ long DECKING
D – 2 pieces of 2×4 lumber – 84″ long, 2 pieces – 78 1/2″ long, 2 pieces – 61″ long, 2 pieces – 66 1/2″ long POSTS
E – 2 pieces of 2×6 lumber – 96″ long SUPPORT BEAMS
F – 14 pieces of 1×6 lumber – 48″ long, 7 pieces – 70 1/2″ long WALLS

7 pieces of 2×6 lumber – 8 ft
1 piece of 4×4 lumber – 12 ft
14 pieces of 1×6 lumber – 8 ft
12 pieces of 2×4 lumber – 12 ft
2 pieces of 2×4 lumber – 8 ft
7 pieces of 1×4 lumber – 8 ft
50 sq ft of metal roofing
construction glue
2 1/2″ screws, 3 1/2″ screws, 1 5/8″ screws
rafter ties
1 1/2″ structural screw
wood filler , wood glue, stain/paint

Tools

Hammer, Tape measure, Framing square, Level

Miter saw, Drill machinery, Screwdriver, Sander

Safety Gloves, Safety Glasses

Time

One day

Firewood Shed Plans

It’s that easy to build a firewood shed!

How to build a 4×6 wood shed

Floor-frame-for-the-4×8-shed

The first step of the project is to build the floor frame. Cut the joists from 2×6 lumber, as shown in the diagram. Drill pilot holes through the rim joists and insert 3 1/2″ screws into the perpendicular components. Align the edges flush and make sure the corners are square. Place the joists every 16″ on center.

Fitting the skids

Select the location for the wood storage shed. Level the ground and remove the vegetation layer. Using 4×4 skids under the floor frame will help protect the components from the elements. Align the skids, drill pilot holes through the floor frame and insert 3 1/2″ screws to lock them together tightly.

Floor slats

Fit the 2×4 boards to the floor frame. Set 1″ spacers between the boards to create even gaps. Drill pilot holes through the boards and insert 2 1/2″ screws to secure them into place tightly.

Corner-posts-for-shed

Use 2×4 lumber for the posts. Cut the components at the right dimensions, as shown in the diagram. Add glue to the joints and align the edges flush. Drill pilot holes and insert 2 1/2″ screws, every 10″ to create the corner posts.

Attaching the posts to the shed floor

Fit the posts to the floor of the shed. Align the edges flush and plumb the posts with a spirit level. Drill pilot holes through the posts and insert 3″ lag screws to lock them to the frame.

4×6 firewood shed plans – side slats

Use 1×6 boards for the side wall panels. Cut the slats at 48″ and then attach them to the vertical posts with 1 5/8″ screws, after drilling pilot holes. Start from the floor up to the top. Fit 3″ spacers at both ends of the slats, to create even gaps.

Fitting the back slats

Attach the 1×6 boards to the back of the shed, as well, using the same techniques described above.

Fitting the support beams

Attach the 2×6 support beams to the front and back of the wood shed. Center the beams into place, so you have 10 1/2″ overhangs on both sides. Drill pilot holes and insert 3″ lag screws to lock beam into place.

How-to-build-a-4×6-woodshed

This small firewood shed is easy to build and it features a sturdy design that will add value to your backyard. If you like this structure, you should also check out PART 2 of the plans, where I show you how to build the lean to roof.

1 cord Wood Shed Plans

1 cord Wood Shed – back view

This 4×6 wood shed is ideal for any homeowner, as it will shelter the firewood from the weather, while adding a touch of unique charm to your backyard. I have many design ideas on this blog, so make sure you take a look over all the alternatives before taking a decision. Premium Plans are available in the SHOP or check out the GET PDF PLANS button bellow. If you want to get PREMIUM PLANS for this project, in a PDF format, please press GET PDF PLANS button bellow. Thank you for the support.

This woodworking project was about 4×12 wood 1 cord shed plans. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.