2×8 Firewood Shed Roof Plans – PART 2

This step by step diy project is about 2×8 6/10 cord firewood shed roof plans. This is PART 2 of the small firewood shed project, where I show you how to build lean to roof and how to attach the trims. See the rest of my firewood shed free plans HERE. Take a look over the rest of my woodworking plans, if you want to get more building inspiration. Premium Plans for this project available in the Shop.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day.

Projects made from these plans

2×8 Firewood Shed Roof Plans – PART 2

Building-a-2×8-firewood-shed

Cut and Shopping Lists

• Unlock Lists

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One day

Related

• Firewood Shed Plans

Make sure you follow me on Facebook to be the first that gets our latest plans and for some other exclusive content. Also, follow me on Pinterest to get many ideas for your backyard from all the internet! Check out our YouTube channel! See how you can Support  Me with no extra costs to you. 

How to build a 2×8 wood shed roof

Building-the-rafters

Use 2×4 lumber for the rafters. Mark the cut lines on the beams and then get the job done with a circular saw. Smooth the edges flush. You need the birdsmouth cuts to lock the rafters into place easily.

Setting-the-rafters

Fit the rafters to the support beams. Place the supports every 16″ on center. Use rafter ties and 1 1/2″ structural screws to secure the rafters into place tightly.

Fitting-the-purlins

Attach the 1×4 purlins to the front and to the back of the shed roof. Align the edges flush, drill pilot holes and insert 1 5/8″ screws, to lock them into place tightly. The purlins will support the metal sheets.

Side-roof-trims

Attach the 1×6 trims to the sides of the firewood shed. Align the edges and insert 2″ nails to lock them into place tightly.

Front-and-back-roof-trims

Fit the 1×6 trims to the front and to the back of the she roof. Align the trims to the sides and make sure they are flush with the top of the purlins. Use 2″ nails to secure the trims to the rafters.

Fitting-the-roofing

Next, attach the metal roof sheets to the top of the firewood shed. Align the edges and secure the sheets to the purlins with 3/4″ roofing screws, or the size recommended for the roofing sheets you get.

2×8 firewood shed plans

Last but not least, you need to take care of the finishing touches. Fill the holes with wood putty and smooth the surface with 120-220 grit sandpaper. Apply a few coats of paint or stain to enhance the look of the shed and to protect the components from the elements.

2×8 wood shed – front view

You should also check out my 3 cord firewood shed plans. I have many design ideas on this blog, so make sure you take a look over all the alternatives before taking a decision. Premium Plans for this project available in the Shop.

This woodworking project was about 2×12 1 cord wood shed roof plans. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

- EXPLORE MORE IDEAS FOR -