10×10 Saltbox Shed Roof Plans

This step by step diy project is about 10×10 saltbox shed roof plans. This is PART 2 of the 10×10 storage shed, where I show you how to build the saltbox style roof. This shed has a sturdy structure, but I strongly recommend you to read and comply with the local building codes. This covers the build of the roof and of the front 4′ door. Take a look over the rest of my woodworking plans, if you want to get more building inspiration.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day. See all my Premium Plans HERE.

Projects made from these plans

10×10 Saltbox Shed Roof Plans

10×10-saltbox-shed—building-project

Cut & Shopping Lists

• H – 2 pieces of T1-11 siding – 48″x55 1/4 long, 2 pieces – 48″x54 1/2″ long, 2 pieces – 24″x20 3/4″ long ROOF END PANELS
• I – 2 pieces of 2×4 lumber – 45 1/4″ long, 1 piece of 2×6 lumber – 120″ long RIDGE BEAMS
• J – 9 pieces of 2×4 lumber – 60″ long, 9 pieces – 96″ long RAFTERS
• L – 2 pieces of 2×4 lumber – 96″ long, 2 pieces – 60″ long, 12 pieces – 4 1/2″ long 2xOVERHANG
• K – 2 pieces of 3/4″ plywood – 8″x60″ long, 2 pieces – 8″x96″ long, 1 piece – 48″x96″ long 1 piece – 48″x88″ long, 1 piece – 24″x48″ long, 1 piece – 48″x48″ long, 1 piece – 48″x72″ long, 1 piece – 24″x32″ long, 1 piece – 12″x56″ long, 1 piece – 12″x64″ long  ROOF
• L – 2 pieces of 1×6 lumber – 97 1/4″ long, 2 pieces – 61 1/4″ long, 4 pieces – 104″ long TRIMS
• M – 200 sq ft of tar paper, 200 sq ft of asphalt shingles ROOFING
• N – 2 pieces of 2×4 lumber – 80″ long, 1 piece – 55″ long JAMBS
• O – 2 pieces of 2×4 lumber – 73″ long, 2 pieces – 48″ long, 1 piece – 41″ long 2xDOOR
• P – 2 pieces – 95 3/4: long, 2 pieces – 93 3/4″ long, 2 pieces – 69 3/4″ long, 2 pieces – 71 3/4″ long, 4 pieces – 32″ long, 4 pieces – 39″ long TRIMS

• 7 pieces of 2×4 lumber – 10′
• 20 pieces of 2×4 lumber – 8′
• 3 pieces of T1-11 siding – 4’x8′
• 6 pieces of 3/4″ plywood – 4’x8′
• 1 piece of 2×6 lumber – 10′
• 12 pieces of 1×4 lumber – 10′
• 2 pieces of 1×6 lumber – 12′
• 2 pieces of 1×6 lumber – 10′
• 2 pieces of 1×6 lumber – 8′
• 200 sq ft of tar paper, 200 sq ft of asphalt shingles
• 8d nails, 2 1/2″ screws, 3 1/2″ screws
• 1 5/8″ screws
• rafter ties
• wood filler , wood glue, stain/paint
• shed hinges

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One week

Related

• PART 1: 10×10 Saltbox Shed Plans
• PART 2: 10×10 Saltbox Shed Roof Plans

10×10 Saltbox Shed Roof Plans

Rafters-for-10×10-shed

The first step of the project is to build the 2×4 rafters for the garden saltbox shed. Use a miter saw and make 30 degree cuts to one end of the beams.

Rafter 2

Next, you need to make the 35 degree cuts to the other rafters. Use 2×4 lumber for these rafters, as well.

Fitting the ridge beam

Continue the project by fitting the ridge beams to the top of the shed structure. Install the 2×4 supports to the top plates of the side walls. Secure the supports into place with corner brackets and screws. Next, attach the 2×6 beam to the top of the supports. Plumb the supports with a spirit level and check if the corners are square. Align the edges with attention and leave no gaps between the components. Drill pocket holes through the supports and insert 2 1/2″ screws to lock the top beam into place.

Fitting-the-rafters—10×10-shed

Fit the rafters to the top of the shed, every 16″ on center, as shown in the plans. Use rafter ties to secure the rafters into place tightly.

Roof end supports

Cut and fit the 2×4 supports to the sides of the shed, so you can fit the siding panels.

Side top panels

Cut the T1-11 sheets for the roof side ends and then secure them to the supports with 6-8d nails, every 8″ along the framing.

Building the overhangs

Assemble the overhangs for the front and back of the shed. Drill pilot holes through the rafters and insert 3 1/2″ screws into the blockings.

Attaching the overhangs to both sides of the shed

Fit the overhangs to the sides of the shed. Align the edges flush, drill pilot holes and insert 3 1/2″ screws to lock them into place tightly.

Roof sheets 2

Fit the 1/2″ or 3/4″ plywood sheets to the roof of the shed. Align the edges flush and leave no gaps between the components. Drill pilot holes and insert 1 5/8″ screws every 8″ along the rafters to lock the sheets into place tightly.

Roof sheets

Fit the roofing sheets to the opposite side of the shed, as shown in the diagram. Leave no gaps between the sheets and then insert 1 5/8″ screws every 8″ along the framing.

Side roof trims

Fit the 1×6 trims to the sides of the shed. Use a miter saw to make the angle cut to one end of the trims and then secure them into place with 2″ nails.

Front and back roof trims

Attach the 1×6 trims to the front and back of the storage shed. Align the edges flush and insert 2″ nails to lock them into place tightly.

Fitting the roofing to the 10×10 saltbox shed

Cover the roof of the shed with roofing felt, making sure the strips overlap at least 2″. Secure the tar paper to the plywood sheets with roofing staples. In addition, cut a 12″ piece for the top ridge. Fit the side drip edges over the roofing felt, while the bottom drip edges should be fit under.

Door jambs – 10×10 saltbox shed

Fit the 2×4 jambs around the door opening. Align the edges flush and insert 2 1/2″ screws to lock them into place tightly.

Front shed door

Use 5/8″ T1-11 siding sheets for the door panels and 2×4 lumber for the door frames. Use pocket holes and 2 1/2″ screws to assemble the door frame, then attach the panel into place. Use 2″ nails to secure the panel to the door frame.

Fitting the door to the front of the shed

Fit the doors to the opening, as shown in the diagram. Attach the doors to the jambs with hinges. Install a latch to keep the doors shut.

Front window trims

Fit the window to the opening and then attach the 1×4 trims, to enhance the look of the shed project.

Back wall trims

Fit the 1×4 trims to the back of the shed. Align the edges and insert 2″ nails to lock them into place tightly.

Front wall trims

Fit the 1×4 trims to the front of the shed.

10×10 saltbox shed plans – side view

This shed is the ideal choice for your backyard, if you need a small shelter to store tools and other items. This shed is build on a sturdy 2×4 framing and it features a saltbox roof. The side and front windows will help you get enough light inside the shed.

10×10 saltbox shed plans

Make sure you check out the rest of the project, so you learn how to frame the 10×10 garden shed. In addition, I have lots of other shed projects on the site so I recommend you to browse through all alternatives before starting the building project.

This woodworking project was about 10×10 gable shed roof plans free. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

- EXPLORE MORE IDEAS FOR -