Leopold Bench Plans

This step by step diy project is about Leopold bench plans. I have designed this simple Leopold bench so you can build this well known project in a few hours with minimal effort and money. Make sure you invest in weather resistant lumber, such as pressure treated lumber, cedar or redwood, as the bench will be most likely exposed to the elements. Take a look over the rest of my woodworking plans, if you want to get more building inspiration.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day. See all my Premium Plans HERE.

Projects made from these plans

DIY Leopold Plant Stand

Building a leopold bench

  

Leopold Bench Plans

Building a Leopold bench

Cut & Shopping Lists

• A – 2 pieces of 2×8 lumber – 37 1/8″ long LEGS
• B – 2 pieces of 2×8 lumber – 22 1/8″ long BACK LEGS
• C – 1 piece of 2×10 lumber – 30″ long SEAT
• D – 1 piece of 2×6 lumber – 33″ long BACKREST

• 1 piece of 2×8 lumber – 10′
• 1 piece of 2×6 lumber – 3′
• 1 piece of 2×10 lumber – 3′
• 50 pieces of 2 1/2″ screws
• wood glue, stain/paint
• wood filler

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One day

Related

• Garden bench plans
• Double chair bench plans

Building a Leopold bench

Building the front legs

The first step of the project is to build the front legs. Cut both ends of the 2×8 beams at 60 degrees by using a miter saw. Smooth both ends of the legs with sandpaper, so you can clean edges.

Back leg

Continue the woodworking project by making another cut at the top of the legs. This cut will help you attach the backrest easily. Take accurate measurements and smooth the edges with sandpaper.

Building the back legs

Next, you need to build the back legs for the Leopold bench from 2×8 lumber. Cut both ends at 60 degrees, as in the case of the front legs.

Assembling the sides

Continue the project by assembling the two sides of the Leopold bench. Lay the legs on a level surface so you can align the components in a professional manner. Add waterproof glue to the joints, drill pilot holes and insert 2 1/2″ screws to lock everything together tightly.

Fitting the seat

Build the seat from a piece of 2×10 lumber. Center the seat to the back legs, drill pilot holes at both ends and secure it into place with 2 1/2″ screws. In addition, drill pilot holes through the sides and insert 2 1/2″ screws into the seat.

Fitting the backrest

Build the backrest from 2×6 lumber. Align both ends with attention, drill pilot holes at both ends and insert 2 1/2″ screws into the legs.

Free leopold bench plans

After assembling the Leopold bench you need to take care of the finishing touches. Fill the holes with wood putty and smooth the surface with 120-220 grit sandpaper. Apply a few coats of stain and then spar varnish, so you can protect the components from the elements.

Leopold bench plans

This is an unique project, so if you are looking for a woodworking project with a distinctive look this should be on your list. This Leopold bench can be built in a few hours, but it will shortly become a conversation piece due to the unconventional design. If you build this, I would love to see your project.

This woodworking project was about free Leopold bench plans. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

- EXPLORE MORE IDEAS FOR -