16×24 Pole Barn Roof Plans

This step by step diy woodworking project is about free 16×24 pole barn roof plans. This is PART 2 of the pole barn project. In this article I show you my take on building the trusses and how to complete the walls and roofing. Read the local building codes and consider buying engineered trusses. Make sure you take a look over the rest of plans to see alternatives and more projects for your garden.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day. See all my Premium Plans HERE.

Projects made from these plans

Free Pole Barn Roof Plans

Building-a-16×24-pole-barn

Cut & Shopping Lists

• D – 12 pieces of 2×6 lumber – 48″ long POST BRACES
• E – 1 piece of 2×6 lumber – 192″ long, 2 pieces – 119 1/4″ long, 2 pieces of 2×4 lumber – 50 5/8″ long, 2 pieces – 23 7/8″ long 4xTRUSS
• E – 4 pieces of 2×4 lumber – 105 3/4″ long, 6 pieces – 96″ long, 2 pieces – 34 1/4″ long BRACES
• F – 24 pieces of 2×4 lumber – 106 1/2″ long, 12 pieces – 96″ long GIRTS
• F – 4 pieces of 2×6 lumber – 93 3/4″ long, 2 pieces – 94 1/2″ long BLOCKINGS
• G – 12 pieces of 1/2″ plywood – 48″x96″ long, 4 pieces – 24″x48″ long, 6 pieces – 24″x96″ long, 2 pieces – 24″x24″ long ROOF SHEETS*
• H – 550 sq ft of metal sheets ROOFING
• I – 20 pieces of 1/2″ OSB – 48″x96″ long, 6 pieces – 18 1/4″x96″ long, 2 pieces – 21 1/4″x91 1/2″ long, 4 pieces – 48″x48″ long, 1 piece – 5 1/2″x96″ long WALL SHEETS
• J – 4 pieces of 2×6 lumber – 105 3/4″ long, 2 pieces of 1×8 lumber – 96″ long, 4 pieces – 108″ long TRIMS

• 12 pieces of 2×6 lumber – 10′
• 4 pieces of 2×6 lumber – 16′
• 23 pieces of 2×4 lumber – 8′
• 28 pieces of 2×4 lumber – 10′
• 12 pieces of 2×6 lumber – 8′
• 26 pieces of 1/2″ – 4’x8′
• 2 pieces of 1×8 lumber – 8′
• 4 pieces of 1×8 lumber – 10′
• 17 pieces of 1/2″ plywood -4×8′ *
• house wrap
• 550 sq ft of metal sheets
• 2 1/2″ screws
• 1 5/8″ screws
• Truss plans, Truss plate
• Truss ties

Tools

 Hammer, Tape measure, Framing square, Post hole digger, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One week

Make sure you follow us on Facebook to be the first that gets our latest plans and for some other exclusive content. Also, follow us on Pinterest to get many ideas for your backyard from all the internet! Check out our YouTube channel! See how you can Support Us with no extra costs to you. 

How to build a 16×24 pole barn roof

Fitting the braces

Use 2×6 lumber for the braces. Make 45 bevel cuts to both ends of the braces. Fit the braces to the posts and lock them to the truss carriers, as well.

Building-the-rafters-for-16-ft-trusses

I recommend you buy engineered trusses, as they give you a good balance between costs and benefits. They will give you instructions on the span you need to leave between them and on the thickness of the truss carriers.

However, I will show you my take on building the trusses by yourself. Remember to read the local codes so you can make adjustments if needed. The first step is to build the rafters for the trusses. Use 2×6 lumber and make a 25 degree cut to one end.

Bottom-chords—16-ft-truss

Use a miter saw to cut both ends of the bottom chords at 25 degrees. Lay the components on a level surface and align everything with attention. Leave no gaps between the rafters.

Truss supports

In order to enhance the strength of the trusses, I recommend you to fit the W shaped supports. Use a saw to make the cuts to the supports.

Fitting-the-webs-to-the-16-ft-truss

Attach the supports to the trusses and leave no gaps between the components. Fit the metal plates to the joints of the components, as shown in the diagram. Align the edges with attention and insert 1 5/8″ screws into the rafters.

Gable end support

Place the end trusses to the front and back of the pole barn. Align the edges flush, plumb the trusses and then lock them into place with screws. Use 2×4 lumber for the middle support. This piece will help you have a back support when attaching the OSB sheeting.

Fitting-the-trusses-16×24-pole-barn

Fit the rest of the trusses, every 8′ on center. Plumb the trusses and then lock them to the carrier beams, using ties.

Side wall sheets – 16×24 Pole Barn Plans

Fit the 1/2″ OSB sheets to the sides of the pole barn. Align the edges flush and leave no gaps between the sheets. Use 6d nails to secure the sheets to the girts, every 8″.

Front wall sheets

Fit the sheets to the front of the pole barn. Make the cuts so you can attach the sheets around the door opening.

Back wall sheets – 16×24 Pole Barn Plans

Fit the sheets to the back of the pole barn.

Fitting the supports to the trusses

Fit the 2×4 supports to the bottom chords. These supports will enhance the rigidity of the roof structure. Use 3 1/2″ screws to secure the supports to the bottom chords. Drill pilot holes at both ends of the supports, to prevent the wood from splitting.

Fitting the diagonal braces

Use 2×4 lumber for the diagonal braces. Use a miter saw to make the angle cuts at both ends of the braces.

Fitting the roof diagonal braces

Fit the braces to the roof structure of the pole barn. Fit the diagonal braces and toenail them into place tightly. These braces will make the roof structure very stiff and remove the wobbles.

Fitting the blockings between the trusses

Next, attach the 2×6 blockings between the trusses, so can fill the gaps and close the pole barn hermetically.

Fitting the purlins

Fit the 2×4 purlins to the top of the roof, every 2′ on center. You can adjust the overhangs to suit your needs.

Fitting the front and back roof trims

Use 2×6 lumber for the front and back roof trims. Secure them to the purlins with 3 1/2″ screws.

Fitting the roof sheets

This step is optional. If you go for metal sheets you install them directly to the purlins. However, you could fit 1/2″ plywood sheets and go for asphalt shingles. Align the edges with attention and secure the sheets to the purlins with 1 5/8″ screws, every 8″ on center.

Fitting the side roof trims

Fit the 1×8 trims to the sides of the roof. Use 6d nails to secure the trims to the trusses.

Fitting the metal roofing sheets

Install the metal sheets / asphalt shingles to the top of the pole barn.

16×24 Pole Barn Plans – Back view

Last but not least, you need to take care of the finishing touches. Wrap the barn with homewrap and then make it pretty with T1-11 siding sheets. Alternatively, you can go for metal sheets from the very beginning and not use OSB and siding.

16×24 Pole Barn Plans

Top Tip: Check out the rest of the shed projects for more inspiration for your backyard.

This woodworking project was about 16×24 pole barn roof plans. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

- EXPLORE MORE IDEAS FOR -