16×24 Lean to Shed Doors Plans

This step by step diy project is about 16×24 lean to shed doors and trims plans. This is PART 3 of the large storage shed project, where I show you how to build the double doors for the storage shed and how to fit the decorative trims. Take a look over the rest of my woodworking plans, if you want to get more building inspiration.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in a few day. See all my Premium Plans HERE.

Projects made from these plans

16×24 Lean to Shed Doors Plans

Building-a-16×24-lean-to-shed

Cut & Shopping Lists

• N – 2 pieces of 2×4 lumber – 80 3/4″ long, 1 piece – 103″ long JAMBS
• O – 2 pieces of 2×4 lumber – 73 3/4″ long, 2 pieces – 48″ long, 1 piece – 41″ long, 1 piece of T1-11 siding – 48″x80 3/4″ long 2xDOOR
• P – 2 pieces of 1×4 lumber – 90 1/4 long, 2 pieces – 122 1/4″ long, 2 pieces – 90 3/4″ long TRIMS

• 10 pieces of 2×4 lumber – 8′
• 4 pieces of 1×4 lumber – 8′
• 2 pieces of 1×4 lumber – 12′
• 2 1/2″ screws, 3 1/2″ screws, 1 5/8″ screws
• 6d nails
• hinges
• wood filler , wood glue, stain/paint
• anchor kit

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One day

Related

• PART 1: 16×24 Lean to Shed Plans 
• PART 2: 16×24 Lean to Shed Roof Plans
• PART 3: 16×24 Lean to Shed Door Plans

Building shed doors for a 16×24 lean to

Door jambs

First of all, you need to attach the 2×4 jambs around the opening. Align the edges flush, drill pilot holes and insert 3 1/2″ screws to lock them into place tightly, every 8″ along the framing.

Building-the-doors

Build the door panels from T1-11 siding and the frame from 2×4 lumber. Start by assembling the door frame using 2×4 lumber and pocket holes. Use 1 5/8 screws to lock the panels to the frame. Add glue to the joints and align the edges flush.

Fitting the double doors

Fit the double doors to the front opening. Align the edges with attention and use hinges to lock the doors to the jambs. Install a latch to lock the doors into place tightly.

Side wall trims

Cut and fit the 1×4 trims to the sides of the shed. Align the edges with attention and insert 2″ nails, every 8″ along the framing.

Front wall trims

Fit 1×4 trims to the back of the shed, using the same techniques described above. Fit the trims to the front of the shed, as well.

16×24 Lean to Shed Plans – Back view

This storage shed is large enough to store all your tools, garden furniture and lots of other items one has in a household. The best part of this shed is that it has been designed to keep the costs down. Furthermore, if you have enough skills and experience, you can save a few bucks by getting the job done by yourself. However, remember that you still need an extra pair of hands to help you assemble everything.

16×24 Lean to Shed Plans

Last but not least, you need take care of the finishing touches. Fill the holes with wood putty and then smooth the surface with 120-220 grit sandpaper. Apply a few coats of paint or stain to the components, so you can protect them from decay and so you can enhance the look of the shelter. Check out PART 1 and PART 2 of the shed, so you can learn everything you need to know about building the floor, walls and roof for the shed.

This woodworking project was about 16×24 shed doors plans. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

- EXPLORE MORE IDEAS FOR -