Â
This step by step diy woodworking project is about modern outdoor chair plans. I have designed this modern chair with backrest so you can have matching chairs for the outdoor bench. These chairs are super sturdy and easy to build. If you like the neat and modern design, you should give the plans a try. If you enjoy my design, don’t forget to take a look over the rest of my free plans HERE.
There are so many designs and materials to choose from, that we really recommend you to spend some time researching the most suitable plans for your needs. If you still haven’t found what you are looking for, we strongly recommend you to pay attention to these instructions and to check out the related projects, if you want to get more ideas and potential projects for your home and garden. See all my Premium Plans HERE.
Â
Â
Projects made from these plans
Â
Â
Modern Outdoor Chair Plans
Building-a-modern-outdoor-chair
Â
Cut & Shopping Lists
- A – 2 pieces of 2×4 lumber – 17″ long, 3 pieces of 2×4 lumber – 33 1/2″ long LEGS
- B – 4 pieces of 2×4 lumber – 11 1/4″ long SUPPORTS
- C – 4 pieces of 2×4 lumber – 17 1/2″ long, 1 piece – 15 1/4″ long FRAME
- D – 10 pieces of 1×4 lumber – 18 1/4″ long, 2 pieces – 3 1/2″ long, 2 pieces – 2 3/4″ long, 2 pieces – 2 1/4″ long, 2 pieces – 1 1/2″ long, 24 pieces – 19″ long SLATS
- 3 pieces of 2×4 lumber – 8′
- 8 pieces of 1×4 lumber – 8′
- 2 1/2″ screws, 1 5/8″ screws
- 2″ nails
- wood filler , wood glue
Tools
 Hammer, Tape measure, Framing square, Level
 Miter saw, Drill machinery, Screwdriver, Sander
 Post hole digger, Concrete mixer
 Safety Gloves, Safety Glasses
Time
 One day
Related
Â
Â
Â
Â
How to build a modern chair
Building-the-bench-legs
The first step of the project is to build the legs for the modern outdoor chair. As you can see in the diagram you need 2×4 lumber. Mark the cut lines on the components and then get the job done with a circular saw. Make parallel cuts inside the marked areas and remove the excess with a chisel. Smooth the recess with sandpaper.
Fitting the supports
The next step of the project is to build the front and back frames for the chair. As you can see in the diagram, you need to attach the 2×4 supports to the front and back legs. Drill pilot holes through the supports and insert 2 1/2″ screws. Add glue to the joints and make sure the corners are square.
Assembling-the-chair-frame
Continue the project by attaching the cross supports. Drill pocket holes at both ends of the 2×4 components and insert 2 1/2″ screws to lock everything tightly. Make sure the corners are square.
Side bench slats
Fit the 1×4 slats to the sides of the outdoor chair. Use a miter saw to make the angle cuts and then smooth the edges with sandpaper. Place a piece if 1/4″ between the slats so you create even and consistent gaps. Use glue and 2″ nails to secure the slats into place tightly.
Back slats
Fit the slats to the back of the chair, using the same techniques described above. Align the edges with attention before inserting the nails.
Seat and backrest slats
Last but not least, attach the slats to the seat and to the backrest of the chair.
Modern Outdoor Chair Plans – Back view
Last but not least, you need to take care of the finishing touches. Fill the holes and the dents with wood putty and then smooth the surface with 120-220 grit sandpaper. Apply a few coats of stain or paint to enhance the look of the chair and to protect them from the elements.
Modern Outdoor Chair Plans
This is a simple woodworking project, so any person with basic diy skills can get the job done in a few hours. If you like my project, I recommend you to take a look over the rest of my woodworking plans HERE. See all my chair plans HERE. Choose from thousands of free designs and fill your life with DIY joy!
Â
Â
This woodworking project was about modern outdoor chair plans. If you want to see more outdoor plans, we recommend you to check out the rest of my step by step projects. Feel free to SHARE my plans with your friends, using the social media widgets.
Â
- EXPLORE MORE IDEAS FOR -
 |
 |
 |
 |
