Home Brags DIY Workbench with Pegboard

DIY Workbench with Pegboard

by Ovidiu
written by Ovidiu 745 views 1 minutes read

 

This section of our site is dedicated to woodworkers and DIY-ers that have built a project inspired by our outdoor plans and have sent us photos and a few comments about their woodworking endeavor.

I strongly encourage you to send me photos and your feedback regarding the projects on MyOutdoorPlans. Please send me the materials at admin@myoutdoorplans.com or using the contact form.

 

 

DIY Workbench with Pegboard

Building-a-workbench-with-pegboard

 

From Robert,

It took me around 3 hours total time. I started out by cutting all pieces needed on the list for prepping. I also marked each piece with cut size so I know which ones to grab. I used a 1/2 OSB board for shelves for bench I had laying around my shop instead of 3/4 plywood in the plans.

I additionally added a pegboard (2’x4′) and attached to back of bench. I also added swivel castor wheels at the bottom of bench with brakes on them so I can use inside my shed or wheel outside on a nice day. The project costed me around a total of $60.00 and well worth it! I look forward to using my outdoor plans for further projects in the future. Thanks!

 

 

From Plans: http://myoutdoorplans.com/workshop/how-to-build-a-work-bench/

Difficulty Level: easy

Time Required: 3 hours

Total Cost: $60

 

 

- EXPLORE MORE IDEAS FOR -

You may also like

6×12 Lean to Shed – DIY Project

5 Guitar Stand – DIY Project

Double Chair Bench with Table – DIY Project

10×10 Pergola – DIY Project

DIY 12×16 Hip Roof Pavilion

DIY Halloween Decoration

DIY Wood Outhouse

DIY Double Loveseat Bench with Table

DIY 8×8 Lean to Shed

DIY Large Run in Shed

I've been a designer and a woodworker since I first developed consciousness.

Leave a Comment