Home Brags DIY Wood Garden Swing with Stand

DIY Wood Garden Swing with Stand

by Ovidiu
written by Ovidiu 873 views 1 minutes read

 

This section of our site is dedicated to woodworkers and DIY-ers that have built a project inspired by our outdoor plans and have sent us photos and a few comments about their woodworking endeavor.

We strongly encourage you to send us photos and your feedback regarding the projects on MyOutdoorPlans. Please send us the materials at admin@myoutdoorplans.com or using the contact form.

 

 

DIY Wood Garden Swing with Stand

Building-a-porch-swing-bench

 

Back-view-of-porch-swing

 

Swing stand

 

From Jay Kee,

I used cedar and shortened the width of everything a few inches to fit my space. I added two additional back and seat supports by just duplicating the originals in the plan. I then used pocket holes to join the supports together along with wood glue. It took me a few weekends to complete the sanding and assembly. Finished with 5 coats of water borne polycrilic.
 

From Plans: http://myoutdoorplans.com/furniture/porch-swing-stand-plans/

Difficulty Level: medium

Time Required: 2 weekends

Total Cost: –

 

 

- EXPLORE MORE IDEAS FOR -

You may also like

6×12 Lean to Shed – DIY Project

5 Guitar Stand – DIY Project

Double Chair Bench with Table – DIY Project

10×10 Pergola – DIY Project

DIY 12×16 Hip Roof Pavilion

DIY Halloween Decoration

DIY Wood Outhouse

DIY Double Loveseat Bench with Table

DIY 8×8 Lean to Shed

DIY Large Run in Shed

I've been a designer and a woodworker since I first developed consciousness.

Leave a Comment