12×14 Lean to Shed Doors Plans

This step by step diy project is about 12×14 shed doors and trims plans. This is PART 3 of the 10×16 lean to shed project, where I show you how to build the double doors for the storage shed and how to fit the decorative trims. Take a look over the rest of my woodworking plans, if you want to get more building inspiration. Remember that you need to select the site for the shed with attention and that you have to comply with a few legal regulations.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day. See all my Premium Plans HERE.

Projects made from these plans

12×14 Lean to Shed Doors Plans

Building-a-12×14-lean-to-shed

Cut & Shopping Lists

• J – 2 pieces of 2×4 lumber – 103″ long, 1 piece – 75 1/2″ long JAMBS
• K – 1 piece of T1-11 siding – 48″x75 1/2″ long, 2 pieces of 2×4 lumber – 48″ long, 2 pieces – 75 1/2″ long, 1 piece – 41″ long 2xDOOR
• L – 2 pieces of 1×4 lumber – 108″ long, 1 piece – 162 1/4″ long, 2 pieces – 106 3/4″ long,  2 pieces – 82 3/4″ long, 2 pieces – 81 3/4″ long, 2 pieces – 30 1/4″ long, 2 pieces – 139″ long TRIMS

• 1 piece of 2×4 lumber – 10′
• 9 pieces of 2×4 lumber – 8′
• 2 pieces of T1-11 siding – 4’x8′
• 1 piece of 1×4 lumber – 14′
• 5 pieces of 1×4 lumber – 8′
• 4 pieces of 1×4 lumber – 10′
• 2 pieces of 1×4 lumber – 12′
• 2 1/2″ screws, 3 1/2″ screws, 1 5/8″ screws
• 4d nails, 16d nails, 6d nails
• hinges
• wood filler , wood glue, stain/paint
• shed accessories

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One day

Related

• PART 1: 12×14 Shed Plans 
• PART 2: 12×14 Shed Roof Plans
• PART 3: 12×14 Shed Door Plans

How to build double shed doors

Fitting-the-shed-door-jambs

Fit the 2×4 jambs around the opening with 2 1/2″ screws. Insert the screws every 8″ along the framing. Align the edges flush.

Building-the-double-doors

Build the door panels from T1-11 siding and the trims from 2×4 lumber. Use 2″ screws to lock the panels to the trims. Add glue to the joints and align the edges flush.

Fitting the double doors

Fit the doors to the opening and align the edges with attention. Install hinges to lock the doors to the jambs tightly. Install a latch so you can lock the doors together tightly.

Back wall trims

Fit the 1×4 trims to the back of the shed. Use 6-8d nails to lock the trims into place, every 8″ along the framing.

Side wall trims

Fit the 1×4 decorative trims to the sides of the shed, as well. Cut the trims at the right dimensions and then lock them into place with 2″ nails.

Front wall trims

Fit the decorative trims to the front of shed. Align the edges with attention and then insert 2″ nails, every 8″, so you can lock them into place tightly.

12×14 Lean to shed Plans

Last but not least, you need take care of the finishing touches. Fill the holes with wood putty and then smooth the surface with 120-220 grit sandpaper. Apply a few coats of paint or stain to the components, so you can protect them from decay and so you can enhance the look of the shelter. Check out PART 1 and PART 2 of the shed, so you can learn everything you need to know about building the floor, walls and roof for the shed.

This woodworking project was about 12×14 lean to shed doors plans. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

- EXPLORE MORE IDEAS FOR -