Home Shed 10×12 Shed Double Doors and Trims

10×12 Shed Double Doors and Trims

by Ovidiu
1.9K views 4 minutes read

 

This step by step diy project is about 10×12 gambrel shed doors plans. This is PART 3 of the storage shed project, where I show you everything you want to know about framing the double doors and fitting the trims. Take a look over the rest of my woodworking plans, if you want to get more building inspiration. Remember that you need to select the site for the shed with attention and that you have to comply with a few legal regulations.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day. See all my Premium Plans HERE.

 

 

Projects made from these plans

Add-image

 

 

10×12 Shed Double Doors and Trims

Building-a-10x12-barn-shed

Building-a-10×12-barn-shed

 

Cut & Shopping Lists

  • K – 8 pieces of 1×4 lumber – 96″ long, 3 poieces – 114 1/4″ long, 4 pieces – 139 3/4″ long TRIMS
  • L – 2 pieces of 2×4 lumber – 87 1/2″ long, 1 piece – 79″ long JAMBS
  • M – 2 pieces of 2×4 lumber – 36″ long, 2 pieces – 80 1/2″ long, 1 piece – 29″ long, 2 pieces of T1-11 siding – 36″x87 1/2″ long 2xDOOR

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One day

Related

 

 

Building double doors and trims for a barn shed

Fitting-the-door-jambs

Fitting-the-door-jambs

First of all, you need to build the door jambs. Cut the jambs from 2×4 lumber and attach them around the opening. Make sure the edges are flush, drill pilot holes and insert 2 1/2″ screws.

Building-the-doors

Building-the-doors

Build the door panels from T1-11 siding and the trims from 2×4 umber. Align the trims flush with the door panels and secure them together with glue and 1 5/8″ screws.

Fitting the double doors

Fitting the double doors

Fit the double doors to the front opening and secure them to the jambs with hinges. Also install a latch to secure the front doors tightly together. Check of the doors open and close properly, before you continue the project.

Fitting the trims - Front

Fitting the trims – Front

Attach the 1×4 trims to the front of the barn shed. Align the edges with attention and insert 2″ brad nails to secure them tightly into place.

Trims - Back

Trims – Back

Fit the1x4 trims to the back of the barn shed, as well.

Trims - Sides

Trims – Sides

Use the information from the diagram to lock the trims to the sides of the barn shed, as well. Use 2″ brad nails to lock the trims into place tightly.

10x12 Barn Shed Plans

10×12 Barn Shed Plans

Taking care of the finishing touches will help you make the barn shed stand out. Cover the components with stain or paint so you protect them from decay and to enhance the look of the shed.

You need to check out PART 1 and 2 of the shed, so you learn how to build the frame and the roof for the barn shed. Moreover, I strongly recommend you to check out the rest of the shed projects that I have on the blog.

 

 

This woodworking project was about 10×12 barn shed doors and trims plans. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

 

 

Previous

 

 

- EXPLORE MORE IDEAS FOR -

You may also like

4 comments

Steve Stoltz -

i was wondering if there is more to the plan for this shed. I like the plans so far. Thanks. Steve.

Reply
Ovidiu -

What do you mean by more?

Reply
Derrek -

Is there a complete lumber purchase list? I’m pretty sure some of this can’t be purchased as stated and has to be cut. I’m new to this kind of thing just need a list I can take to the lumber yard so I don’t buy lumber I don’t need.

Reply
Ovidiu -

The A to Z is the Cut list. The list bellow that is the Shopping list. Each part of the plans comes with its own lists. If you want a plan that comes with a consolidated Shopping list, check out the plans in the SHOP area.

Reply

Leave a Comment