Home Brags DIY Drill Press Stand

DIY Drill Press Stand

by Ovidiu
written by Ovidiu 639 views 1 minutes read

 

This section of our site is dedicated to woodworkers and DIY-ers that have built a project inspired by our outdoor plans and have sent us photos and a few comments about their woodworking endeavor.

We strongly encourage you to send us photos and your feedback regarding the projects on MyOutdoorPlans. Please send us the materials at admin@myoutdoorplans.com or using the contact form.

 

 

DIY Drill Press Stand

DIY-Dill-Press-Stand

 

From Jim,  

Used 2 4×4 sheets of 3/4 inch plywood from HD at $23.58 each and 4 3″ caster wheels are $6.97 each. Also used about 80 #8 Kreg 1-1/4 screws.  I put on draw fronts with scrap 1/2″ plywood I had.

Great project and drill press stand plans were easy to follow, thank you very much.

 

 

From Plans: http://myoutdoorplans.com/workshop/drill-press-stand-plans/

Difficulty Level: easy

Time Required: 1 day

Total Cost: 55 $

 

 

- EXPLORE MORE IDEAS FOR -

You may also like

6×12 Lean to Shed – DIY Project

5 Guitar Stand – DIY Project

Double Chair Bench with Table – DIY Project

10×10 Pergola – DIY Project

DIY 12×16 Hip Roof Pavilion

DIY Halloween Decoration

DIY Wood Outhouse

DIY Double Loveseat Bench with Table

DIY 8×8 Lean to Shed

DIY Large Run in Shed

I've been a designer and a woodworker since I first developed consciousness.

Leave a Comment