Homemade Deer Feeder Plans

This step by step diy project is about homemade deer feeder plans. Building a deer feeder can be done in several ways, so make sure you check out the related projects on this site. You can get the job done in just one weekend, as the project requires basic skills and materials. Align the components at both ends and create rigid joints, by inserting galvanzied screws.

There are many designs and shapes you could choose from, but this project is ideal if you want to feed deers and other wild animals. This woodworking project features a wide tray, where you could place seeds, corn or even hay. Work with attention and adjust the size and the designs of the feeder, as to suit your needs and budget. Cover the structure with wooden boards or metal sheets, to protect the deer food from water damage. See all my Premium Plans HERE.

Projects made from these plans

How to build a deer stand

DIY Deer Feeder

DIY Deer Feeder

  

Homemade Deer Feeder Plans

Building a deer stand

Cut & Shopping Lists

• A – 4 pieces of 4×4 lumber – 52″ long POSTS
• B – 2 pieces of 2×6 lumber – 57″ long, 2 pieces – 22 1/2″ long FRAME
• C – 2 pieces of 2×2 lumber – 19 1/2″ long, 2 pieces – 47″ long CLEAT
• D – 1 pieces of 3/4″ plywood – 22 1/2″x47″ long PANEL
• D – 2 pieces of 2×4 lumber – 48″ long STAKES
• E – 2 pieces of 2×4 lumber – 20″ long, 1 piece – 23 1/4″ long 2xRAFTER
• F – 10 pieces of 1×6 lumber – 60″ long ROOFING

• 2 pieces of 4×4 lumber – 10 ft
• 2 pieces of 2×6 lumber – 8 ft
• 1 piece of 2×2 lumber – 8 ft
• 2 pieces of 2×4 lumber – 8 ft
• 5 pieces of 1×6 lumber – 10 ft
• 1 piece of 3/4″ plywood – 2’x4′
• 1 1/4″ screws
• 1 5/8″ screws
• 2 1/2″ screws
• filler, stain
• glue

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One day

Make sure you follow us on Facebook to be the first that gets our latest plans and for some other exclusive content. Also, follow us on Pinterest to get many ideas for your backyard from all the internet! See how you can Support Us with no extra costs to you. 

How to build a deer feeder

Fitting the legs

First of all, you need to build the legs for the deer feeder. If you want a permanent construction, you should dig 2′ holes and fit the 4×4 pressure-treated legs. Use a spirit level to make sure the legs are plumb. Use gravel and dirt to lock the posts into place tightly.

Building the frame

Next, build the frame for the deer feeder using 2×6 lumber. Drill pilot holes and insert 2 1/2″ screws to lock the components together tightly. Use a square to make sure the corners are right-angled. Use a spirit level to check if the frame is perfectly level. Align the edges with attention before inserting the screws.

Fitting the cleats

Attach 2×2 cleats to the inside of the frame, as shown in the plans. Drill pilot holes through the cleats and insert 2 1/2″ screws into the frame.

Fitting the panel

Continue the project by fitting the 3/4″ plywood panel to the cleats. Use 1 1/4″ screws to secure the panel to the cleats, after drilling pilot holes.

Building the roof

Fitting the stakes

Next, you need to build the 2×4 stakes for the deer feeder. Cut the top of the slats at 45 degree, as shown in the diagram. Center the stakes to the sides of the frame, drill pilot holes and secure them with 2 1/2″ screws. Plumb the stakes with a spirit level, to prevent the wood from splitting. If you worry about the stability of the structure, you can add several diagonal braces to support the stake.

Building the rafters

Continue the project by assembling the rafters for the deer feeder. Cut the components from 2×4 lumber, using the information from the diagram. Drill pilot holes and insert 2 1/2″ screws to lock the rafters together tightly.

Fitting the rafters

Fit the rafters to the stakes, drill pilot holes and insert 2 1/2″ screws.

Fitting the roofing slats

Last but not least, you should fit 1×6 cedar slats to the roofing, as shown in the diagram. Use galvanized nails to secure the slats to the rafters and make sure they overlap at least 1″. Alternatively, you can use corrugated metal sheets.

Homemade Deer Feeder Plans

Fill the holes and dents with wood putty and let it dry out for several hours. Use 120-200 grit sandpaper to smooth the surface. Remember that you can adjust the dimensions for the deer feeder to suit your needs.

Deer feeder – free plans

Top Tip: If you want to enhance the look of the project and to protect the components from decay, we recommend you to apply paint or stain.

This woodworking project was about homemade deer feeder plans. If you want to see more outdoor plans, we recommend you to check out the rest of our step by step projects. LIKE us on Facebook and Google + to be the first that gets out latest projects and to hep us keep adding free woodworking plans for you.

- EXPLORE MORE IDEAS FOR -