8×6 Shed Door Plans

This step by step diy project is about 8×6 shed door plans. This is PART 3 of the sturdy storage shed, where I show you how to build the front doors. Make sure you check out the first and second part of the project, so you learn how to build the frame of the shed, as well as the roof. You can easily adjust the size and the design of the doors, to suit your needs. Take a look over the rest of my woodworking plans, if you want to get more building inspiration.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day. See all my Premium Plans HERE.

Projects made from these plans

8×6 Shed Door Plans

Building-a-8×6-gable-shed

Cut & Shopping Lists

• L – 2 pieces of 2×4 lumber – 76 1/2″ long, 1 piece – 42″ long JAMBS
• M – 2 pieces of 2×4 lumber – 69 1/2″ long, 2 pieces – 35″ long, 1 piece – 28″ long, 1 piece of T1-11 – 35″x76 1/2″ long DOOR
• N – 8 pieces of 1×4 lumber – 82 3/4″ long TRIMS

• 6 pieces of 2×4 lumber – 8′
• 8 pieces of 1×4 lumber – 8′
• door hinges and latch
• 8d nails, 2 1/2″ screws, 3 1/2″ screws, 1 5/8″ nails
• wood filler , wood glue, stain/paint
• shed accessories

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One day

Related

• PART 1: 8×6 Gable Shed Plans
• PART 2: 8×6 Gable Shed Roof Plans
• PART 3: 8×6 Gable Shed Door and Trims Plans

Building shed doors

Jambs

Fit 2×4 jambs around the door opening. Cut the components at the right dimensions and secure the jambs into place with 2 1/2″ screws. Align the edges flush.

Double-front-doors

Continue the project by assembling the shed doors. Cut the frame of the 2×4 lumber at the right dimensions and lock them into place with 2 1/2″ screws and construction glue. Align the edges flush and make sure the corners are square. Attach the T1-11 siding sheets with 2″ nails, every 8″ along the framing. The siding panels are the ones you cut out in the previous steps.

Fitting the door

Fit the shed door to the opening and lock them to the jambs with hinges. In addition, install a latch to keep the doors shut.

Fitting the side wall jambs

Fit the 1×4 trims to the sides of the shed. Align the edges with attention and insert 2″ nails to secure the trims into place tightly.

Front and back wall trims

Fit the 1×4 trims to the front and back of the shed, as well. Align the edges with attention and then insert 8d nails to lock them into place tightly.

8×6 Gable Shed Plans

Make sure you check out the rest of the project, so you learn how to frame the 8×6 garden shed and how to build the gable roof. See PART 1 and PART 2. In addition, I have lots of other shed projects on the site so I recommend you to browse through all alternatives before starting the building project.

This woodworking project was about 8×6 shed door plans free. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

- EXPLORE MORE IDEAS FOR -