4x10 Saltbox Wod Shed Roof Plans

This step by step diy project is about 4×10 saltbox wood shed roof plans. This is PART 2 of the wood storage shed saltbox shed where I show you how to frame the roof and how to fit the decorative trims. See the rest of my firewood shed free plans HERE. Take a look over the rest of my woodworking plans, if you want to get more building inspiration.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day. See all my Premium Plans HERE.

Projects made from these plans

4×10 Saltbox Wod Shed Roof Plans

Building-a-4×10-firewood-shed

Cut & Shopping Lists

G – 11 pieces of 2×4 lumber – 56 1/2″ long, 11 pieces – 12″ long, 2 pieces – 8 1/2″ long, 2 pieces – 16″ long RAFTERS
G – 2 pieces of T1-11 siding – 48″x91 1/4″ long, 2 piece – 9 1/2″x10 1/2″ long, 2 pieces – 48″x62 1/4″ long, 1 piece – 24″x63 1/4″ long SIDING
I – 2 pieces of 3/4″ plywood – 48″x55 1/2″ long, 2 pieces – 12″x48″ long, 1 piece – 24″x55 1/2″ long, 1 piece – 12″x24″ long ROOF
J – 100 sq ft of tar paper, 100 sq ft of asphalt shingles ROOFING
K – 2 pieces of 1×4 lumber – 59″ long, 2 pieces – 12 1/4″ long, 1 piece – 122 3/4″ long, 1 piece – 121 1/4″ long ROOF TRIMS
K – 2 pieces of 1×3 lumber – 61 1/2″ long, 2 pieces – 88″ long, 2 pieces – 60″ long, 2 pieces – 82″ long TRIMS
K – 2 pieces of 1×3 lumber – 68 3/4″ long, 1 piece – 73″ long, 2 pieces of 1×4 lumber – 11 1/4″ long OPENING TRIMS

12 pieces of 2×4 lumber – 8′
4 pieces of T1-11 siding – 4’x8′
3 pieces of 3/4″ plywood – 4’x8′
2 pieces of 1×4 lumber – 12′
3 piece of 1×4 lumber – 8′
6 pieces of 1×3 lumber – 6′
5 pieces of 1×3 lumber – 8′
100 sq ft of tar paper, 100 sq ft of asphalt shingles
2 1/2″ screws, 3 1/2″ screws, 1 5/8″ screws
6d nails, 16d nails
wood filler , wood glue, stain/paint

Tools

Hammer, Tape measure, Framing square, Level

Miter saw, Drill machinery, Screwdriver, Sander

Safety Gloves, Safety Glasses

Time

One day

Relaated

PART 1: 4×10 Wood Shed Plans
PART 2: 4×10 Saltbox Wood Shed Plans Plans

How to build a 4×10 firewood shed

Building-the-rafters

The first step of the project is to build the rafters for the firewood shed. Mark the cut lines on the beams and then get the job done with a saw. As you can easily notice in the diagram, you need to make birdsmouth cuts to the rafters, so you can fit them into place tightly.

Front-rafters

Next, you have to build the front rafters from 2×4 lumber. Use a good miter saw to make the 60 degree cut to the beams, as shown in the diagram.

Fitting the rafters

Fit the rafters to the top of the shed, as shown in the diagram. Use rafter ties to lock the rafters into place tightly. Moreover, you need to lock the front rafters to the regular rafters using 3 1/2″ screws, after drilling pilot holes.

Side wall supports

Fit the 2×4 supports to the sides of the shed. Drill pocket holes at both ends and insert 2 1/2″ screws to lock the supports into place tightly.

Side walls – Siding

Cut the side panels to the right size and shape and then fit them to the shed frame, as shown in the diagram. Align the edges flush and insert 6″ nails every 8″ along the framing.

Back wall

Fit T1-11 siding sheets to the back of the firewood shed. Cut the T1-11 siding sheets to the right dimensions and then attach them to the back of the shed. Align the edges flush and insert 6-8d nails, every 8″ along the framing.

Roof Sheets

Attach the 3/4″ plywood sheets to the top of the shed, after cutting them to the right size. Align the edges flush and insert 1 5/8″ screws, every 8″ along the rafters.

Front roof trim

Fit the 1×4 trims to the front of the shed. Use 2″ nails to secure the trims into place tightly.

Side roof trims

Use 1×4 lumber for the side roof trims. Make the angle cuts to both ends of the trims, as shown in the plans.

Fitting the back roof trim

Fit the 1×4 trims to the back of the shed.

Fitting the roofing

Cover the roof of the shed with roofing felt, making sure the strips overlap at least 2″. Secure the tar paper to the plywood sheets with roofing staples. In addition, cut a 12″ piece for the top ridge. Fit the side drip edges over the roofing felt, while the bottom drip edges should be fit under.

Fitting the side trims

Fit the 1×3 trims to the sides of the shed. Align the edges flush and insert 2″ nails to secure them into place tightly.

Back trims

Fit the trims to the back of the shed, as well.

Front trims

Fit the 1×3 trims to the front of the shed. Align the edges flush and insert 2″ nails to secure them into place tightly.

Front opening trims

Last but not least, you need to attach the trims around the front opening. Align the edges flush and insert 2″ nails to lock them into place tightly.

4×12 Firewood Shed Plans

This 4×10 wood shed is ideal for any homeowner, as it will shelter the firewood from the weather, while adding a touch of unique charm to your backyard. This shed can shelter more than 1 cord of wood. Take a look over PART 1 of the shed, so you learn how to build the frame for the shed.

This woodworking project was about 4×10 wood shed plans. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.