12x16 Gable Shed with 2x6 Studs Roof Plans

This step by step diy project is about 12×16 gable shed with 2×6 studs roof plans. This is PART 2 of the sturdy 12×16 storage shed, where I show you how to build the gable roof. Make sure you check out the first and third part of the project, so you learn how to build the frame of the shed and how to build the double front doors. You can easily adjust the design of this shed and add more doors of windows, to suit your needs. Take a look over the rest of my woodworking plans, if you want to get more building inspiration.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day. See all my Premium Plans HERE.

Projects made from these plans

12×16 Gable Shed with 2×6 Studs Roof Plans

Building-a-12×16-gable-shed

Cut & Shopping Lists

H – 2 pieces of T1-11 siding – 28″x48 long, 1 piece – 40″x48″ long 2xGABLE END
I – 2 pieces of 2×6 lumber – 90″ long, 1 piece – 136″ long, 1 piece – 28 1/2″ long 13xTRUSS
J – 8 pieces of 2×6 lumber – 90″long, 24 pieces – 6 1/2″ long 2xOVERHANG
K – 4 pieces of 3/4″ plywood – 10″x90″ long, 4 pieces – 48″x96″ long, 4 pieces – 42″x48″ long, 2 pieces – 42″x96″ long ROOF
L – 300 sq ft of tar paper, 300 sq ft of asphalt shingles ROOFING
M – 4 pieces of 1×8 lumber – 91 1/4″ long, 2 pieces – 212″ long TRIMS

39 pieces of 2×6 lumber – 8′
13 pieces of 2×6 lumber – 12′
3 pieces of T1-11 – 48″x96″
1 piece of 1/2″ plywood – 48″x96″
9 pieces of 3/4″ plywood – 48″x96″
4 pieces – 1×8 lumber – 8′
2 pieces of 1×8 lumber – 18′
8d nails, 2 1/2″ screws, 3 1/2″ screws
wood filler , wood glue, stain/paint

Tools

Hammer, Tape measure, Framing square, Level

Miter saw, Drill machinery, Screwdriver, Sander

Safety Gloves, Safety Glasses

Time

One week

PART 1: 12×16 Shed with 2×6 Studs Plans
PART 2: 12×16 Shed with 2×6 Studs Roof Plans
PART 3: 12×16 Shed with 2×6 Studs Door and Trims Plans

Building a 12×16 gable shed roof plans

Building-the-rafters

The first step of the project is to build the rafters for the 12×16 shed roof. Mark the cut lines on the rafters and get the job done with a circular saw and with a chisel. Make sure you smooth the recesses for a neat result. In addition make the angle cut, by using the miter saw.

Assembling the trusses

Next, you need to attach the bottom rafters to assemble the truss. In order to speed up the process, I recommend you to lay them on a level surface and to make a jig, so you align everything properly and easily. Cut both ends of the 2×4 bottom rafters at 26.6 degrees. Next, fit the supports to the trusses, so you add more strength to the structures.

Fitting the gussets

Use 1/2″ plywood for the gussets. Attach the gussets to the joints and lock them into place with 1 1/2″ screws. Attach construction glue to the joints for a professional result.

Fitting-the-trusses

Fit the trusses to the top plates of the garden shed, spacing them every 16″ on center. Use a spirit level to plumb the trusses and secure them to the top plates of the walls with nails.

Gable end panels

Attach the T1-11 siding panels to the gable ends. Align the edges with attention and secure them into place with 8d nails. Leave no gaps between the panels for a professional result.

Assembling the overhangs

In order to create nice overhangs for the front and back faces of the storage shed, I recommend you to build the rafters. Mark the cut lines on the 2×6 beams and get the job done with a circular saw. Fit the blockings with 3 1/2″ screws. You can adjust the size of the overhangs to suit your needs.

Fitting the overhangs

Fit the overhangs to the front and back of the shed, as shown in the diagram. Align the edges with attention, drill pilot holes and insert 3 1/2″ screws to lock them into place tightly.

Fitting-the-roof-sheets

Attach 3/4″ plywood sheets to the roof structure of the 12×16 shed. Cut the sheets at the dimensions shown in the diagram and secure them into place with 1 5/8″ screws, every 8″ along the rafters. Leave no gaps between the sheets and align the edges flush.

Side roof trims

Build the side trims for the roof from 1×8 lumber. Use 8d nails to secure the trims to the end of the rafters.

Gable roof trims

Attach the 1×8 trims to the front and back overhangs and secure them into place with 8d brad nails. Leave no gaps between the components for a professional result.

Fitting the roofing

Cover the roof of the shed with roofing felt, making sure the strips overlap at least 2″. Secure the tar paper to the plywood sheets with roofing staples. In addition, cut a 12″ piece for the top ridge. Fit the side drip edges over the roofing felt, while the bottom drip edges should be fit under.

12×16 Shed with 2×6 Studs Plans

Make sure you check out the rest of the project, so you learn how to frame the 12×16 garden shed and how to build the double doors. In addition, I have lots of other shed projects on the site so I recommend you to browse through all alternatives before starting the building project.

12×16 Shed with 2×6 Studs – Free Plans

This storage shed has a large surface for keeping all your tools organized. The double front doors and the single side door help you have an easy access to the inside of the shed.

This woodworking project was about 12×16 shed with 2×6 studs plans free. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.