10×24 Field Shed Roof Plans

This step by step diy woodworking project is about a 10×24 field shed roof plans. This is PART 2 of the shed project, where I show you how to build the gable roof. This roof has a 2:1 pitch, but you can adjust it super easily. Take a look over the rest of my woodworking plans, if you want to get more building inspiration.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day. See all my Premium Plans HERE.

Projects made from these plans

10×16 Field Shed Roof Plans

Building-a-10×24-field-shed

Cut & Shopping Lists

• D – 2 pieces of T1-11 siding – 27 1/4″x48″ long, 2 pieces – 37 3/4″x48″ long, 2 pieces – 43″x48″ long, 2 pieces – 16 1/2″x24″ long SIDING
• F – 26 pieces of 2×6 lumber – 94 1/4″ long, 13 pieces – 168″ long, 26 pieces of 2×4 lumber – 16 1/2″ long, 13 pieces – 31 1/2″ long RAFTERS
• G – 6 pieces of 3/4″ plywood – 48″x96″ long, 4 pieces – 43 3/4″x48″ long, 4 pieces – 43 3/4″x96″ long ROOF SHEETS
• H – 6 pieces of 1/2″ plywood – 24″x96″ long SOFFIT
• H – 400 sq ft of tar paper, 400 sq ft of asphalt shingles ROOFING
• I – 4 pieces – 95″ long, 2 pieces – 146 1/8″ long TRIMS

• 26 pieces of 2×6 lumber – 8′
• 13 pieces of 2×6 lumber – 14′
• 12 pieces of 2×4 lumber – 10′
• 12 pieces of 3/4″ plywood – 4’x8′
• 5 pieces of 1/2″ plywood – 4’x8′
• 4 pieces of 1×8 lumber – 8′
• 4 pieces of 1×8 lumber – 14′
• 400 sq ft of tar paper, 400 sq ft of asphalt shingles
• rafter ties
• 1 5/8″ screws, 2″ nails, 2 1/2″ screws
• wood glue, stain/paint

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One day

Related

• PART 1: 10×24 Field Shed Plans
• PART 2: 10x24 Field Shed Roof Plans

Make sure you follow me on Facebook to be the first that gets my latest plans and for some other exclusive content. Also, follow me on Pinterest to get many ideas for your backyard from all the internet! Check out my YouTube channel! See how you can Support Me with no extra costs to you. 

How to build a 10×24 field shed roof

Rafters

Use 2×6 lumber for the rafters. Use a miter saw to make the angle cuts at both ends of the rafters. Smooth the edges with sandpaper

Bottom-chords—field-shed-10×24

Use 2×6 lumber for the bottom rafters, as well. Use a circular saw to make the angle cuts at both ends.

Fitting the truss supports

Use 2×4 lumber for the vertical supports. Use a saw to make the angle cuts at the top of the supports and then fit them into place. Align the edges with attention.

Fitting the gussets

Use 1/2″ plywood for the gussets. Lay the gussets over the joints and align the edges with attention. Use 1 5/8″ screws to lock the gussets into place.

Fitting-the-trusses—10×24-shed

Fit the trusses to the top of the shed frame. Place the trusses every 24″ on center and plumb them with a spirit level. Use rafter ties to lock the trusses into place tightly.

Gable end panels

Use T1-11 siding sheets to the side gable end panels. Align the edges with attention and leave no gaps between the panels. Insert 6d nails, every 8″ along the framing.

Fitting the roof sheets

Use 3/4″ plywood for the roof sheets. Cut the sheets at the right dimensions and then secure them into place with 1 5/8″ screws, every 8″ along the framing.

Soffit sheets

You can attach 1/2″ plywood sheets to the front overhang. Cut the sheets at the right dimensions and then fit them into place. Align the edges with attention and leave no gaps between the sheets. Insert 6d nails to secure the sheets into place tightly.

Side roof trims

Use 1×8 lumber for the side roof trims. Make the angle cuts with a miter saw.

Fitting the side roof trims

Fit the 1×8 boards to the sides of the shed. Align the edges with attention and insert 3 1/2″ screws to lock them into place tightly.

Front and back trims

Fit the 1×8 trims to the front and back of the shed, as well.

Fitting the roofing

Cover the roof with tar paper and then install the asphalt shingles. Make sure you also install the appropriate drip edges, so you can seal the shed roof. Read the manufacturer’s instructions for a tight fit. Alternatively, you could also install metal sheets.

10×24 Field Shed Plans – back view

This run in shed is super sturdy and it features a classic design.

10×24 Field Shed Plans – front view

Don’t forget to take a look over PART 1 of the project, so you learn how to build the frame of the 12×12 shed. This pavilion is sturdy and it features a very elegant design that puts and emphasis on cost efficiency and durability. You can add railings to the exterior of the pavilion.

This woodworking project was about 10×24 field shed roof plans. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

- EXPLORE MORE IDEAS FOR -