8x24 7 1/2 Cord Firewood Shed Roof Plans

This step by step diy project is about 8×24 7 1/2 cord firewood shed roof plans. This lean to shed has a roof pitch of 3:12. This is PART 2 of the large firewood shed project, where I show you how to build lean to roof and how to attach the side wall panels. See the rest of my firewood shed free plans HERE. Take a look over the rest of my woodworking plans, if you want to get more building inspiration. Premium Plans for this project available in the Shop.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day.

8×24 Firewood Lean to Shed Roof Plans

Building-a-8×24-firewood-shed

Cut & Shopping Lists

Unlock List

Tools

Hammer, Tape measure, Framing square, Level

Miter saw, Drill machinery, Screwdriver, Sander

Safety Gloves, Safety Glasses

Time

One weekend

Firewood Shed Plans

How to build a 8×24 wood shed roof

Rafters

Use 2×6 lumber for the rafters. Mark the cut lines on the beams and then get the job done with a circular saw. Smooth the edges flush. You need the birdsmouth cuts to lock the rafters into place easily.

Fitting-the-rafters

Fit the rafters to the support beams. Place the supports every 24″ on center. Use rafter ties and 1 1/2″ structural screws to secure the rafters to both support beams (font and back of the shed). The ties will create rigid and durable joists, therefore your shed will be protected in the case of high winds or snow.

Side-middle-posts

After setting the raters to the top of the shed, we need to attach the supports to both sides of the woodshed. Plumb the support and secure them to the floor frame and rafters, using 3″ lag screws.

Fitting-the-side-slats

Use 1×6 slats for the side walls. Place 3″ spacers between the slats, to create even gaps. You need two spacers, one for each end of the panel. Drill pilot holes and insert 1 5/8″ screws to secure the slats to the posts. You need the gaps between the slats to speed up the drying process of the firewood.

Fitting-the-back-slats

Attach the 1×6 slats to the back of the firewood shed. Place the 3″ spacers to create even gaps between the slats. Drill pilot holes and insert 1 5/8″ screws to lock the slats into place.

Fitting-the-purlins

Fit the 1×4 purlins to the top of the shed. Place the purlins every 16″ on center. Use 1 5/8″ screws to secure the slats to the rafters. We need these purlins to have a proper support for the metal roofing sheets.

Fitting-the-roof-trims

Attach the 1×8 trims to the front and to the back of the shed roof. Align the edges flush, drill pilot holes and insert 1 5/8″ screws, to lock them into place tightly.

8×24-firewood-Shed—dimensions

Next, attach the metal roof sheets to the top of the firewood shed. Align the edges and secure the sheets to the purlins with 3/4″ roofing screws, or the size recommended for the roofing sheets you get.

8×24 firewood Shed – diy project

This is a modern shed that can both shelter firewood for the cold season and outdoor fireplace, but also become a covered area ideal for storing tools and outdoor furniture. The attention to details and the lean to roof will with a modern design will make this shed one your favorite projects.

8×24 firewood Shed

This 8×24 wood shed is large and it can store up to 7 and a half cords of wood. This lean to shed is sturdy and cheap to build. The cost to benefit ratio is very good. You should also check out my 5 cord firewood shed plans. I have many design ideas on this blog, so make sure you take a look over all the alternatives before taking a decision. Premium Plans for this project available in the Shop.

This woodworking project was about 8×24 7 1/2 cord wood shed roof plans. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.