This step by step diy project is about 16×16 shed doors plans. This is PART 3 of the large lean to shed project, where I show you everything you want to know about framing the door and fitting the trims. Take a look over the rest of my woodworking plans, if you want to get more building inspiration. Remember that you need to select the site for the shed with attention and that you have to comply with a few legal regulations.
When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day. See all my Premium Plans HERE.
Projects made from these plans
16×16 Lean to Shed Doors Plans
Building-a-16×16-lean-to-shed
Cut & Shopping Lists
Tools
Hammer, Tape measure, Framing square, Level
Miter saw, Drill machinery, Screwdriver, Sander
Time
One day
Related
- PART 1: 16×16 Lean to Shed Plans
- PART 2: 16×16 Lean to Shed Roof Plans
- PART 3: 16×16 Lean to Shed Door Plans
How to build a 16×16 shed door and trims
Double-door-jambs
The first step of the project is to attach the jambs around the side door opening. Fit the 2×4 jambs around the door opening. Align the edges flush and insert 2 1/2″ screws to secure them into place tightly.
4-ft-shed-door-frame
Build the door frame from 2×4 lumber. Drill pocket holes at both ends of the vertical and middle components. Lay the boards on a level surface and align the edges flush. Insert 2 1/2″ screws to lock the door frame together.
Assembling-the-double-shed-doors
Build the door panels from T1-11 siding. Use 1 5/8 screws to lock the panels to the frame. Add glue to the joints and align the edges flush.
Fitting-the-double-doors
Fit the doors to the side opening and then secure them to the jambs with hinges. Install a latch so you can lock the door into place tightly. Install handles so you can open and close the door easily.
Front-door-jambs
Fit the 2×4 jambs around the front door opening, as well. Cut the jambs from 2×4 lumber and then secure them into place with 2 1/2″ screws, every 8″ along the framing.
Small-shed-door-frame
Build the side door frame in the same manner described above.
Assembling-the-small-shed-door
Attach the siding panel to the frame, using 1 5/8″ screws.
Fitting-the-front-door
Fit the door to the side of the shed. Align the edges with attention and then lock the door to the jambs with hinges. Install a latch to lock the door into place tightly.
Installing-the-window
Fit the 1×4 trims to the front of the shed and around the windows.
16×16 lean to shed plans – overall dimensions
Last but not least, take care of the finishing touches. Fill the holes with wood putty and smooth the surface with 120-220 grit sandpaper. Apply a few coats with paint or stain to enhance the look of the shed and to protect the components from decay. You could also fit several accessories that will make your shed a lot more easier to operate. Check out PART 1 for the frame plans and PART 2 for the roof plans.
This woodworking project was about 16×16 shed door plans. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.
EXPLORE MORE IDEAS FOR:
 |
 |
 |
 |
