Home Brags Drill Press Stand – DIY Project

Drill Press Stand – DIY Project

by Ovidiu


This section of our site is dedicated to woodworkers and DIY-ers that have built a project inspired by our outdoor plans and have sent us photos and a few comments about their woodworking endeavor. We strongly encourage you to send us photos and your feedback regarding the projects on MyOutdoorPlans. Please send us the materials at admin@myoutdoorplans.com or using the contact form.



Drill Press Stand – DIY Project



From Erin,

This took one sheet of plywood, which around here is $90. But I bought the two recommended sheets, so it’s been pricey from the beginning. I wanted to use this project to practice using my domino machine and dado set. I added 3/8 ” to the shelves and drawer bottoms and made rabbets in them and dadoes to accept them in the cabinet sides and drawer sides. The top and bottom are aligned with domino’s and reinforced with screws up from the bottom and pocket screws on top. Finished with linseed oil/mineral spirits/spar varnish. This project took me… Awhile. But it’s been a good learning experience.



From Plans: https://myoutdoorplans.com/workshop/drill-press-stand-plans/

Difficulty Level: easy

Time Required:

Total Cost: $90





You may also like

Leave a Comment