Home Brags DIY Log Horse

DIY Log Horse

by Ovidiu


This section of our site is dedicated to woodworkers and DIY-ers that have built a project inspired by our outdoor plans and have sent us photos and a few comments about their woodworking endeavor.

We strongly encourage you to send us photos and your feedback regarding the projects on MyOutdoorPlans. Please send us the materials at admin@myoutdoorplans.com or using the contact form.



DIY Log Horse

Building a sawbuck


DIY Log Horse


From Garandman ,

I built this log horse pretty quickly. I used three 2x4x8 and two 1x4x8 pressure treated lumber and some 5/16×4″ bolts. Total cost of the materials was 22 $. I made the legs 42″ instead of 36″ and the width 48″. I drilled pilot holes at the bottom of the legs so I can put lines through to prevent them from spreading under pressure. I also added diagonal braces to make it stronger. Full project here.



From Plans: http://myoutdoorplans.com/workshop/sawbuck-plans/

Difficulty Level: easy

Time Required: 1 day

Total Cost: 22 $





You may also like

Leave a Comment