DIY Kayak Rack

Kayak-rack-diy

Building-a-kayak-rack

DIY-Project-Kayak-Rack

From Bruce,

The plans provided were great and easy to follow. An accurate table saw or mitre saw is needed for the angles.

I made modifications as follows:

1. I used 2×4’s screwed together instead of 4×4’s (lower cost and availability)

2. I eliminated the 4 small cross supports and just added 3rd horizontal beam to the back.

3. To make the “T” stronger I added supports between the vertical part of the rack and the feet.

See pictures for guidance. Thanks so much for supplying this plan!