Home Brags DIY Candle Holder

DIY Candle Holder

by Ovidiu
213 views 2 minutes read


This section of our site is dedicated to woodworkers and DIY-ers that have built a project inspired by our outdoor plans and have sent us photos and a few comments about their woodworking endeavor.

We strongly encourage you to send us photos and your feedback regarding the projects on MyOutdoorPlans. Please send us the materials at admin@myoutdoorplans.com or using the contact form.



DIY Candle Holder







From Matteo,

It’ just a very simple thing I made in 30 minutes with two small scraps of wood. I drilled 3 holes for the candles (22 mm diameter) in the thicker piece and made two 45 degrees cuts in the side to make it looks better, then I cut a notch in the bottom of the exact thickness of the second piece making a sort of dado joint. Glue, one little screw and that’s it!! I didn’t paint it because if some wax should fall maybe it could start smelling bad. Enjoy it!



From Plans: original design

Difficulty Level: easy

Time Required: one day

Total Cost: –





You may also like

Leave a Comment