DIY Bench with Two Planters

This section of our site is dedicated to woodworkers and DIY-ers that have built a project inspired by our outdoor plans and have sent us photos and a few comments about their woodworking endeavor.

We strongly encourage you to send us photos and your feedback regarding the projects on MyOutdoorPlans. Please send us the materials at [email protected] or using the contact form.



DIY Bench with Two Planters





From Scott,

Project was pretty easy, but time consuming with all the smaller cuts and making sure they are all perfectly square.  Turned out very nice though.  ***Note that the cut list says the bench boards are 42″, but they should really be ~52.5″. Total cost was about $160 using cedar tone treated pine, and took approximately 7-8 hours in total  Also the tops of the planters made from 1×6 boards need to be ripped down to 4.5″ wide, in case you don’t have a table saw and need HD to rip it for you.



From Plans:

Difficulty Level: intermediate

Time Required: 1 day

Total Cost: 160 $


One Response

  1. Julian

Leave a Reply

error: Content is protected !!