Home Brags DIY 8×16 Gable Shed

DIY 8×16 Gable Shed

by Ovidiu
written by Ovidiu 988 views 1 minutes read

 

This section of our site is dedicated to woodworkers and DIY-ers that have built a project inspired by our outdoor plans and have sent us photos and a few comments about their woodworking endeavor.

We strongly encourage you to send us photos and your feedback regarding the projects on MyOutdoorPlans. Please send us the materials at admin@myoutdoorplans.com or using the contact form.

 

 

DIY 8×16 Gable Shed

 

Fitting-the-side-walls

 

Fitting-the-roof-sheets

 

Building-the-shed-roof

 

How-to-build-a-10x16-gable-shed

 

From Michelle,

My first full building build! I really enjoyed building this and would like to thank my husband for all the help, especially with the roof. It took 10 weeks from start to finish with a total of $4,346.51.

 

 

From Plans: https://myoutdoorplans.com/shed/8×16-gable-shed-plans/

Difficulty Level: easy

Time Required: 10 weeks

Total Cost: $4,346.51

 

 

- EXPLORE MORE IDEAS FOR -

You may also like

6×12 Lean to Shed – DIY Project

5 Guitar Stand – DIY Project

Double Chair Bench with Table – DIY Project

10×10 Pergola – DIY Project

DIY 12×16 Hip Roof Pavilion

DIY Halloween Decoration

DIY Wood Outhouse

DIY Double Loveseat Bench with Table

DIY 8×8 Lean to Shed

DIY Large Run in Shed

I've been a designer and a woodworker since I first developed consciousness.

2 comments

Chuck Burns -

I purchased the Premium 8 x 16 shed plans. I already built the floor. Now I’m cutting the lumber to make the trusses. I did a test fit of the cut lumber for the trusses.. The angles are close but aren’t a perfect fit. I rechecked the length and the angles and the cut lumber is correct.
Is this typical for the fit of the truss pieces?
Thank you,

Reply
Ovidiu -

That should not happen. The info in the plans is accurate since everything is 3d designed. However, the gaps (is not too large) don’t matter, since you have 1/2″ gussets on both sides holding the trusses together

Reply

Leave a Comment