Home Brags DIY 10×12 Greenhouse Shed

DIY 10×12 Greenhouse Shed

by Ovidiu
written by Ovidiu 466 views 1 minutes read

 

This section of our site is dedicated to woodworkers and DIY-ers that have built a project inspired by our outdoor plans and have sent us photos and a few comments about their woodworking endeavor. We strongly encourage you to send us photos and your feedback regarding the projects on MyOutdoorPlans. Please send us the materials at admin@myoutdoorplans.com or using the contact form.

 

 

DIY 10×12 Greenhouse Shed

Greenhouse-Shed-Plans

 

From Christopher,

Using the plans that I found here on the website, I decided to build the saltbox shed style greenhouse. The total time it took to complete this project was a little over 100 hours. As for the cost, I had to buy a few tools and the supplies, bringing the total to around $3,000.

When building the opening for the window, I opted to make it a little bigger by just cutting the paneling for the roof a little different. Also, I added hurricane ties to the roof to add a little bit of support. I am satisfied with the end result, as I live in a cold region and it is consistently 20 degrees (F) above the outside air temperature after installing a little bit of insulation.

 

 

From Plans: https://myoutdoorplans.com/shed/greenhouse-shed-plans/

Difficulty Level: easy

Time Required: 100 hours

Total Cost: $3,000

 

 

- EXPLORE MORE IDEAS FOR -

You may also like

6×12 Lean to Shed – DIY Project

5 Guitar Stand – DIY Project

Double Chair Bench with Table – DIY Project

10×10 Pergola – DIY Project

DIY 12×16 Hip Roof Pavilion

DIY Halloween Decoration

DIY Wood Outhouse

DIY Double Loveseat Bench with Table

DIY 8×8 Lean to Shed

DIY Large Run in Shed

I've been a designer and a woodworker since I first developed consciousness.

1 comment

tawn'ma -

Hi, thank you kindly for sharing your thought about your project with all the info & tips on how you get through it. I’m curious & ask that you could please share what do you used for the white roofing material for your “green house” effect part, where to get it and how did you fasten it down as structure for that part of the roofing? Would very much appreciate as many tips as you would care to offer. Thanks a bunch.

Reply

Leave a Comment