8×24 Run In Shed Plans – Free PDF Download

This step by step diy project is about free 8×24 run in shed plans. I have designed this wide run in shed so you can build it quickly and save money. I have optimized everything so you can make use of the materials efficiently. This shed features 12″ back and sides overhangs and 24″ front overhang. Read the local codes before starting the project, so you comply with the legal requirements. Take a look over the rest of my woodworking plans, if you want to get more building inspiration.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day. See all my Premium Plans HERE.

Projects made from these plans

8×24 Run In Shed Plans – Free PDF Download

Building a run in shed 8×24

Cut + Shopping List

• A – 2 pieces of 4×4 lumber –  89″ long, 2 pieces – 90 3/4″ long, 1 piece – 92 1/2″ long BASE
• B – 3 pieces of 4×4 lumber – 108″ long, 4 pieces – 92″ long POSTS
• C – 4 pieces of 2×12 lumber – 144″ long, 6 pieces – 96″ long, 5 pieces of 1/2″ plywood – 11 1/4″x96″ long, 2 pieces – 11 1/4″x48″ long HEADERS
• D – 2 pieces of 2×4 lumber – 89″ long, 7 pieces – 96″ long 2xSIDE WALL
• E – 2 pieces of 2×4 lumber – 90 3/4″ long, 7 pieces – 85 1/2″ long 2xBACK WALL
• F – 2 pieces of 2×4 lumber – 92 1/2″ long, 7 pieces – 85 1/2″ long BACK WALL
• G – 6 pieces of T1-11 siding – 12″x48″ long, 6 pieces – 48″x100″ long SIDING

• 9 pieces of 4×4 lumber – 8′
• 3 pieces of 4×4 lumber – 10′
• 4 pieces of 2×12 lumber – 12′
• 6 pieces of 2×12 lumber – 8′
• 45 pieces of 2×4 lumber – 8′
• 7 pieces of 5/8″ T1-11 siding – 4’x10′
• 2 pieces of 1/2″ plywood – 4’x8′
• corner brackets
• 2 1/2″ screws, 3 1/2″ screws, 1 5/8″ screws
• 6d nails
• concrete form
• post anchors
• post to beam connector
• wood filler , wood glue, stain/paint
• heavy duty glue

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

One week

Related

• PART 1: 8×24 Run in Shed Plans
• PART 2: 8×24 Run in Roof Shed Plans

Make sure you follow me on Facebook to be the first that gets our latest plans and for some other exclusive content. Also, follow me on Pinterest to get many ideas for your backyard from all the internet! Check out our YouTube channel! See how you can Support  Me with no extra costs to you. 

Building a 8×24 run in shed

Laying out the posts for a 8×24 run in shed

The first step of the project is to layout the posts for the run in shed and to set them into place. Dig 3′ deep 12″ in diameter holes for the concrete footings. Set the concrete forms and then fill them with concrete. Set the post anchors, making sure they are aligned properly. After a few days, set the 4×4 posts into place with lag screws and temporarily braces,

Bottom plates – 8×24 run in shed

Use 4×4 skids between the posts. Drill pocket holes at both ends and insert 2 1/2″ screws to secure them to the posts (on both sides). Make sure the corners are square and align the edges flush.

Top beam

Use 2×12 beams and 1/2″ plywood to make the back wall headers. Use heavy duty glue and 2 1/2″ screws to assemble the beams.

Top beam – front wall

Repeat the process for the front headers of the run in shed.

Fitting the top plates – 8×24 shed

Fit the beams to the top of the posts. Use connectors to secure the beams to the posts. Make sure the posts are plumb and check if the corners are square. Align everything with attention.

Building the shed wall frames

Side wall frames – 8×24 run in shed

Next, you have to build the side walls from 2x4s. Cut the plates and the studs as shown in the diagram. Drill pilot holes through the plates and insert 3 1/2″ screws into the studs. Place the studs every 16″ on center.

Back wall frames – 8×24 run in shed

Assemble the sections for the back wall using the info from the diagram. You need 2 wall frames.

Back wall frame – section 2

Assemble the middle back wall frame.

Assembling the shed walls

Fit the wall frames between the posts and align the edges flush. Drill pilot holes and insert 3 1/2″ screws through the wall frames into the skids, posts and headers.

Front wall siding sheets

Fit the T1-11 siding sheets to the front of the shed, as shown in the plans. Cut the sheets at the right dimensions and then attach them to the framing with 6d nails, every 8″ along the studs and plates.

Back wall siding sheets – 8×24 run in shed

Fit the 5/8″ siding sheets to the back of the shed. Align the edges with attention and leave no gaps between them for a professional result. Use 6d nails, every 8″ along the framing, to secure the sheets into place tightly.

How to build a 8×24 run in shed

This 8×24 loafing shed is extremely versatile when it comes to uses. You can use it for animals for firewood or for equipment and machinery.

8×24 Run in shed plans

Check out PART 2 of the 8×24 run in shed project project to learn more on how to build the lean to roof structure. If you want to get this plan as a PDF file with 1 full Cut list and 1 full Shopping list, please take a look over the GET PDF PLANS button bellow.

This woodworking project was about 8×24 run in shed plans free. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

- EXPLORE MORE IDEAS FOR -