Home Brags DIY 2×4 Benches

DIY 2×4 Benches

by Ovidiu
written by Ovidiu 429 views 1 minutes read

 

This section of our site is dedicated to woodworkers and DIY-ers that have built a project inspired by our outdoor plans and have sent us photos and a few comments about their woodworking endeavor.

We strongly encourage you to send us photos and your feedback regarding the projects on MyOutdoorPlans. Please send us the materials at admin@myoutdoorplans.com or using the contact form.

 

 

DIY 2×4 Benches

DIY-2x4-Benches

 

From Jeff Spurlin,

This was the first project from this site that I tried, and it came out great. It only cost me the money for the Kreg Jig and the screws, as I already had the wood from some old shelves that I disassembled. The Jig was $20 on Amazon. I used 2 1/2 inch decking screws for the majority of the project, and kreg screws for the pocket joints. I also used TiteBond III Ultimate wood glue (an outdoor-rated waterproof wood glue) to supplement the screws, especially at the top with the pocket joints.

It took me an afternoon to make the cuts and build 2 benches. I sealed and stained them with several coats of a stain/polyurethane combination spray.

If I were to do it again, I would make my cuts and then seal/stain the wood before assembling it.

 

 

From Plans: http://myoutdoorplans.com/furniture/2×4-bench-plans/

Difficulty Level: easy

Time Required: 1 day

Total Cost: $20

 

 

- EXPLORE MORE IDEAS FOR -

You may also like

6×12 Lean to Shed – DIY Project

5 Guitar Stand – DIY Project

Double Chair Bench with Table – DIY Project

10×10 Pergola – DIY Project

DIY 12×16 Hip Roof Pavilion

DIY Halloween Decoration

DIY Wood Outhouse

DIY Double Loveseat Bench with Table

DIY 8×8 Lean to Shed

DIY Large Run in Shed

I've been a designer and a woodworker since I first developed consciousness.

Leave a Comment