8×14 Lean to Shed Roof Plans

This step by step diy project is about 8×14 lean to storage shed roof plans. This is PART 2 of the lean to shed project, where I show you how to build the top back wall and the rafters. This shed roof is super easy to build, if you follow my diagrams with attention. Take a look over the rest of my woodworking plans, if you want to get more building inspiration.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. See all my Premium Plans HERE.

Projects made from these plans

8×14 Lean to Shed Roof Plans

Building-a-8×14-shed-plans

Cut & Shopping Lists

• F – 2 pieces of 2×4 lumber – 168″ long, 10 pieces – 19 1/2″ long BACK WALL
• G – 2 pieces of T1-11 siding – 27 1/2″x48″ long, 2 pieces – 15 1/2″x48″ long, 3 pieces – 22 1/2″x48″ long, 1 piece – 22 1/2″x24″ long SIDING
• H – 8 pieces of 2×4 lumber – 120″ long RAFTERS
• I – 2 pieces of 2×4 lumber – 120″ long, 6 pieces – 8 1/2″ long 2xOVERHANG
• J – 2 pieces of 3/4″ plywood – 48″x96″ long, 2 pieces – 48″x72″ long, 1 piece – 24″x72″ long, 1 piece – 24″x96″ long, 2 pieces – 12″x96″ long, 2 pieces – 12″x24″ long ROOF
• K – 2 pieces of 1×6 lumber – 120″ long, 2 pieces – 193 1/2″ long TRIMS
• L – 180 sq ft of tar paper, 180 sq ft of asphalt shingles ROOFING

• 2 pieces of 2×4 lumber – 14′
• 16 pieces of 2×4 lumber – 8′
• 2 pieces of T1-11 siding – 4’x8′
• 2 pieces of 1×6 lumber – 18′
• 2 pieces of 1×6 lumber – 10′
• 6 pieces of 3/4″ plywood – 4’x8′
• 180 sq ft of tar paper, 180 sq ft of asphalt shingles
• 8d nails, 2 1/2″ screws, 3 1/2″ screws
• wood filler , wood glue, stain/paint

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One week

Related

• PART 1: 8×14 Lean to Shed Plans
• PART 2: 8×14 Lean to Shed Roof Plans
• PART 3: 8×14 Lean to Shed Door Plans

Building a 8×14 lean to shed roof

Top back wall frame

The first step of the project is to build the top back wall frame. Cut the components from 2×4 lumber at right dimensions, as shown in the diagram.

Fitting the top back wall frame

Drill pilot holes through the plates and insert 3 1/2″ screws into the back wall. Align the edges with attention for a professional result.

Top back wall siding panels

Fit T1-11 siding sheets to the top back wall. Leave no gaps between the sheets and leave no gaps between the sheets.

Rafters

As you can easily notice in the diagram, you need to build the rafters from 2×4 lumber. Cut the rafters at the right dimensions and angles using a saw. Lay the rafters on a level surface and align the edges with attention.

Fitting-the-rafters

Fit the trusses to the top of the shed. Plumb the trusses vertically and place the every 24″ on center. Use rafter ties to lock the trusses into place tightly.

Lean to side panels

Fit T1-11 siding panels to the gable ends. Mark the cut lines on the panels and then lock them into place with 6d nails. Leave no gaps between the panels.

Building the overhangs

Next, you need to assemble the overhangs for the shed. Drill pilot holes through the rafters and insert 2 1/2″ screws into the blockings. You can easily adjust the size of the overhangs to suit your needs.

Fitting the overhangs

Fit the overhangs to the sides of the shed. Align the edges, drill pilot holes and insert 3 1/2″ screws to lock them into place tightly.

Roofing sheets

Cut the sheets for the roof from 3/4″ plywood and then fit them to the top of the shed. Align the edges with attention, drill pilot holes and insert 1 5/8″ screws, every 8″ along the rafters. Leave no gaps between the sheets for a professional result.

Fitting the roof trims

Fit the 1×6 trims to the sides of the roof. Align the trims with attention and insert 2″ nails. Fit the 1×6 trims to the front and back of the roof. Align the edges and insert 2″ nails, every 8″ along the framing.

Fitting the roofing

Cover the roof with tar paper and then install the asphalt shingles. Make sure you also install the appropriate drip edges, so you can seal the shed roof. Read the manufacturer’s instructions for a tight fit.

8×14 Lean to Shed Plans – back view

I have lots of other shed projects on the site so I recommend you to browse through all alternatives before starting the building project. See all my shed projects HERE. Moreover, check out PART 1 of the shed, so you learn how to build the frame of the shed. Check out PART 3 to learn how to build the double front doors and how to fit the decorative trims.

This woodworking project was about 8×14 lean to shed roof plans free. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

- EXPLORE MORE IDEAS FOR -