8×8 Gambrel Shed Doors Plans

This step by step diy project is about 8×8 gambrel shed doors and trims plans. This is PART 3 of the 8×8 gambrel storage shed project, where I show you how to build the double doors for the storage shed and how to fit the decorative trims. Take a look over the rest of my woodworking plans, if you want to get more building inspiration.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in a few day. See all my Premium Plans HERE.

Projects made from these plans

8×8 Gambrel Shed Doors Plans

Building-a-8×8-gambrel-shed

Cut & Shopping Lists

• M – 2 pieces of 2×4 lumber – 73 1/2″ long, 1 piece – 79″ long JAMBS
• N – 2 pieces of 1×4 lumber – 66 1/2″ long, 2 pieces – 36″ long, 1 piece – 29″ long, 1 piece of T1-11 siding – 36″x73 1/2″ long 2xDOOR
• O – 8 pieces of 1×4 lumber – 82″ long, 4 pieces – 90 1/4″ long, 3 pieces – 94″ long, 2 pieces – 6 1/2″ long TRIMS

• 10 pieces of 2×4 lumber – 8′
• 15 pieces of 1×4 lumber – 8′
• 2 1/2″ screws, 3 1/2″ screws, 1 5/8″ screws, 1 1/4″ screws
• 6d nails
• hinges
• wood filler , wood glue, stain/paint

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One day

Related

• PART 1: 8×8 Shed Plans 
• PART 2: 8×8 Shed Roof Plans
• PART 3: 8×8 Shed Door Plans

Building shed doors

Fitting-the-door-jambs

First of all, you need to attach the 2×4 jambs around the opening. Align the edges flush, drill pilot holes and insert 2 1/2″ screws to lock them into place tightly.

Building-the-door

Build the door panels from T1-11 siding and the trims from 2×4 lumber. Use 1 5/8 screws to lock the panels to the trims. Add glue to the joints and align the edges flush. The door panels are the pieces you have cut out when installing the sheets to the front wall.

Fitting the doors

Fit the double doors to the front opening. Align the edges with attention and use hinges to lock the doors to the jambs. Install a latch to lock the doors into place tightly.

Side wall trims

Fit the 1×4 trims to the sides of the shed. Align the edges with attention and insert 2″ nails, every 8″ along the framing.

Back wall trims

Fit 1×4 trims to the back of the shed, using the same techniques described above.

Front wall trims

Fit the trims to the front of the shed, as well.

8×8 Gambrel Shed Plans – front view

Last but not least, you need take care of the finishing touches. Fill the holes with wood putty and then smooth the surface with 120-220 grit sandpaper. Apply a few coats of paint or stain to the components, so you can protect them from decay and so you can enhance the look of the shelter. Check out PART 1 and PART 2 of the shed, so you can learn everything you need to know about building the floor, walls and roof for the shed.

This woodworking project was about shed doors plans. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

- EXPLORE MORE IDEAS FOR -