12x8 Double Doors and Trims Plans

This step by step diy project is about 12×8 shed doors plans. This is PART 3 of the gable shed project, where I show you everything you want to know about framing the double doors and fitting the trims. Take a look over the rest of my woodworking plans, if you want to get more building inspiration. Remember that you need to select the site for the shed with attention and that you have to comply with a few legal regulations.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day. See all my Premium Plans HERE.

Projects made from these plans

12×8 Double Doors and Trims Plans

Building-a-12×8-shed

Cut & Shopping Lists

M – 2 pieces of 2×4 lumber – 87 1/2″ long, 1 piece – 79″ long JAMBS
N – 2 pieces of 2×4 lumber – 36″ long, 2 pieces – 80 1/2″ long, 1 piece – 29″ long, 2 pieces of T1-11 siding – 36″x87 1/2″ long 2xDOOR
O – 4 pieces of 2×4 lumber – 95 3/4″ long, 4 pieces – 95 1/4″ long, 3 pieces – 139 3/4″ long, 4 pieces – 90 1/4″ long, 2 pieces – 30 1/2″ long TRIMS

10 pieces of 2×4 lumber – 8′
2 pieces of T1-11 siding – 4’x8′
13 pieces of 1×4 lumber – 8′
3 pieces of 1×4 lumber – 12′
shed hinges
2 1/2″ screws, 3 1/2″ screws, 1 5/8″ screws
4d nails, 16d nails, 6d nails
wood filler , wood glue, stain/paint

Tools

Hammer, Tape measure, Framing square, Level

Miter saw, Drill machinery, Screwdriver, Sander

Safety Gloves, Safety Glasses

Time

One day

PART 1: 12×8 Shed Plans
PART 2: 12×8 Shed Roof Plans
PART 3: Double Shed Doors Plans

Building double doors for a 12×8 shed

Front-double-doors-jambs

The first step of the project is to attach the 2×4 jambs around the door opening. Align the edges with attention, drill pilot holes and insert 2 1/2″ screws to lock them into place.

Building-the-doors

Build the door panels from T1-11 siding and the trims from 2×4 umber. Align the trims flush with the door panels and secure them together with glue and 2″ nails.

Door diagonal trims

Fit 2×4 decorative trims to the corners of the door, so you add more unique appeal. Use 2″ nails to secure the trims to the door.

Fitting the double doors

Fit the double doors to the front opening. Align the edges with attention and use hinges to secure the doors to the jambs. Moreover you need to attach one latch to the doors, so you lock them into place tightly. Fit handles to the double doors.

Fitting the side walls

Fit 1×4 trims to the side walls of the shed. align the edges with attention and use 2″ brad nails to secure them into place tightly.

Back wall – Trims

Fit the trims to the back of the wall. Align the edges with attention and insert 2″ brad nails to lock them into place tightly.

Front trims

Fit the 1×4 trims to the front of the shed, using the same techniques described above.

12×8 Shed Plans – Front View

Taking care of the finishing touches will help you make the barn shed stand out. Cover the components with stain or paint so you protect them from decay and to enhance the look of the shed.

You need to check out PART 1 and PART 2 of the shed, so you learn how to build the frame and the roof for the gable shed. Moreover, I strongly recommend you to check out the rest of the shed projects that I have on the blog.

This woodworking project was about 12×8 shed doors and trims plans. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.