Home Brags DIY Two Person Picnic Table

DIY Two Person Picnic Table

by Ovidiu
written by Ovidiu 575 views 1 minutes read

 

This section of our site is dedicated to woodworkers and DIY-ers that have built a project inspired by our outdoor plans and have sent us photos and a few comments about their woodworking endeavor.

We strongly encourage you to send us photos and your feedback regarding the projects on MyOutdoorPlans. Please send us the materials at admin@myoutdoorplans.com or using the contact form.

 

 

DIY Two Person Picnic Table

 

DIY Two Person Picnic Table

 

From Bren,

This was a great weekend project, I used pressure treated lumber so the total cost was about $60. The only change I think I would make would be to use slightly thicker boards for the top and seat slats, maybe 5/4 X 6 instead of 1 X 6. You can construct the entire thing with one person in a few hours except you may want assistance attaching the side rails to make sure everything is fair and square. The only power tools I used were my mitre saw and a drill.

This will go great on our back patio.  I’m not sure if I am going to stain this yet or not, I’ll figure that out once spring gets here!

 

 

From Plans: http://myoutdoorplans.com/furniture/two-person-picnic-table-plans/

Difficulty Level: easy

Time Required: 1 day

Total Cost: 60$

 

 

- EXPLORE MORE IDEAS FOR -

You may also like

DIY 6×12 3 Cord Firewood Shed

Duck Coop Plan Result

DIY Tiered Planter Box

DIY 3×6 Firewood Shed

Potting Bench with Sink – DIY Project

8’x12′ Storage Shed and 6’x12′ Firewood Shed –...

DIY 14×20 Sunroom

6×12 Lean to Shed – DIY Project

5 Guitar Stand – DIY Project

Double Chair Bench with Table – DIY Project

I've been a designer and a woodworker since I first developed consciousness.

2 comments

jim revell -

regarding two person picnic plans. After doing the math on material list, the materials list does not match the plans The Buying Guide is short on the 2 x 6 boards. Other than that it is a great plan and I enjoyed building it.

Reply
Julian -

Nice catch. I will make the modifications to the buy list. I would love to see how your project turned out!

Reply

Leave a Comment