8x10 Heavy duty Gable Shed Plans

This step by step diy project is about 8×10 gable shed with 2×6 studs plans. I had a request for this small garden shed with a super sturdy structure, so I felt obliged to come up with some free plans. This is my take for a 8×10 super sturdy shed. Take a look over the rest of my woodworking plans, if you want to get more building inspiration.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day. See all my Premium Plans HERE.

Projects made from these plans

8×10 Heavy duty Gable Shed Plans

Building-a-8×10-heavy-duty-shed

Cut & Shopping Lists

A – 4 pieces of 6×6 lumber – 120″ long SKIDS
B – 2 pieces of 2×6 lumber – 120″ long, 9 pieces – 93″long JOISTS
C – 1 piece of 3/4″ plywood – 48″x96″ long, 1 piece – 48″x48″ long, 1 piece – 32″x48″ long, 1 piece – 88″x48″ long FLOOR
D – 2 pieces of 2×6 lumber – 120″ long, 1 piece – 109″ long, 13 pieces – 91 1/2″ long SIDE WALL
E – 1 piece of 2×6 lumber – 96″ long, 2 pieces – 85″ long, 7 pieces – 91 1/2″ long BACK WALL
F – 1 piece of 2×6 lumber – 120″ long, 1 piece – 109″ long, 1 piece – 16″ long, 1 piece – 72″ long, 12 pieces – 91 1/2″ long, 7 pieces – 7 1/2″ long, 2 pieces – 36″ long, 3 pieces – 37″ long, 2 pieces – 78 1/2″ long, 6 pieces – 27″ long, 2 pieces – 35″ long SIDE WALL
G – 2 pieces of 2×4 lumber – 6 1/2″ long, 1 piece – 96″ long, 1 piece – 85″ long, 4 pieces – 91 1/2″ long, 2 pieces – 78 1/2″ long, 7 pieces – 7 1/2″ long, 3 pieces – 75″ long FRONT WALL
H – 8 pieces of 5/8″ T1-11 – 48″x96″ long, 2 pieces – 24″x96″ long SIDING

8 pieces of 2×6 lumber – 10′
62 pieces of 2×6 lumber – 8′
3 pieces of 6×6 lumber – 10′
3 pieces of 3/4″ plywood – 48″x96″
9 pieces of T1-11 – 48″x96″
1 piece of 1/2″ plywood – 48″x96″
8d nails, 2 1/2″ screws, 3 1/2″ screws
1 5/8″ screws
wood filler , wood glue, stain/paint

Tools

Hammer, Tape measure, Framing square, Level

Miter saw, Drill machinery, Screwdriver, Sander

Safety Gloves, Safety Glasses

Time

One week

PART 1: 8×10 Shed with 2×6 Studs Plans
PART 2: 8×10 Shed with 2×6 Studs Roof Plans
PART 3: 8×10 Shed with 2×6 Studs Door and Trims Plans

It’s that easy to build a 8×10 shed – Video!

How to build a 8×10 Heavy Duty Shed

Floor frame for 8×10 shed

The first step of the project is to build the floor for the 8×10 heavy duty shed. Cut the joists from 2×6 lumber using a good saw. Align the beams, making sure the corners are square, drill pilot holes and insert 3 1/2″ screws to lock them together tightly. Alternatively, you can use joist hangers to secure the beams together.

Fitting the skids

After assembling the floor frame, you need to attach the 6×6 skids. Use metal connectors to secure the skids to the joists, after aligning them or toenail them. The skids will lift the floor frame from the ground and protect it from the elements.

Floor sheets

Continue the project by attaching the 3/4″ plywood sheets to the floor frame. Leave no gaps between the floor sheets and secure them into place with 1 5/8″ screws, every 8″ along the joists.

side-wall-frame

Assemble the plain side wall from 2×6 lumber. Cut the studs and the plates at the right dimensions. Drill pilot holes through the top plates and insert 3 1/2″ screws or framing nails into the studs, using the information from the diagram. Place the studs, every 16″ on center. Make sure the corners are square for a professional result. As you can see in the plans, you need to fit 1/2″ plywood fillings to the triple end studs.

Side-wall-with-window-and-door-frame

Build the opposite side wall for the storage shed using the same techniques described above. The only difference is that you could frame a 32″ access door, so you can enter the garden shed easily. Build the triple header from 2×6 and 1/2″ plywood. Remember that you can adjust the size of the door and window openings to suit your needs.

Front-wall-frame-8×10-shed

Continue the project by assembling the front wall. As you can notice in the free shed plans, you need to leave enough space for the door opening. You can easily adjust the size of the door to suit your nails. As you can see in the plans, you need to install the jack studs to reinforce the structure of the shed.

Building the triple headers

The triple header for the door is made from 2×6 lumber filled with 1/2″ plywood. Cut the plywood to size and glue it to the headers with construction glue. In addition, drive a few screws or nails to lock everything tightly.

Back-wall-frame

Build the back wall using the same techniques described above. You should also notice the double plates that will add more rigidity to the walls and to the overall framing.

Assembling the shed frame

Lift the side walls and lay them to the floor of the shed. Align the edges with attention and use a spirit level to plumb the walls. Drill pilot holes through the bottom plates and insert 3 1/2″ screws into the floor frame, every 8″. Lock the adjacent wall frames together with 3 1/2″ screws. Moreover, drill pilot holes through the bottom rails and insert 3 1/2″ screws into the floor.

Back wall siding panel

Build the exterior walls from 5/8″ T1-11 siding. Align the edges with attention and leave no gaps between the sheets. Use 6-8d galvanized nails to secure the sheets to the wall frames. Align everything with attention and insert the nails every 8″ along the studs.

Front wall siding

Make the cuts to the sheet that goes around the door opening. Align everything so the edges are flush and secure them into place with 6-8d nails.

Side wall siding

Fit the sheets to the plain side wall of the shed. Align the edges with attention and leave no gaps between the sheets.

Side wall with window siding

Attach the rest of the sheets to the opposite side wall of the shed. Align the edges with attention and secure them to the wall studs with 6-8d nails or screws. Make sure you leave no gaps between the sheets for a professional result.

Building a 8×10 shed with 2×6 studs

This shed is easy to build and extra sturdy. This shed will hold a high snow load and it is designed to withstand strong winds. You can easily customize this shed to suit your needs, by adding windows or changing the placement of the doors.

8×10 Heavy duty Shed Plans

Make sure you check out the rest of the project, so you learn how to frame the roof and how to attach the door and the trims to the shed. See PART 2 and PART 3. In addition, I have lots of other shed projects on the site so I recommend you to browse through all alternatives before starting the building project.

If you want to get this project as a PDF file, with 1 Cut list and 1 Shopping list, please check out the GET PDF PLANS button bellow.

This woodworking project was about 8×10 shed with 2×6 studs plans free. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.