Home Brags DIY 2 Tier Plant Stand

DIY 2 Tier Plant Stand

by Ovidiu
written by Ovidiu 450 views 1 minutes read

 

This section of our site is dedicated to woodworkers and DIY-ers that have built a project inspired by our outdoor plans and have sent us photos and a few comments about their woodworking endeavor. We strongly encourage you to send us photos and your feedback regarding the projects on MyOutdoorPlans. Please send us the materials at admin@myoutdoorplans.com or using the contact form.

 

 

DIY 2 Tier Plant Stand

How-to-build-a-2-tier-planter-stand

 

Plant-Stand---DIY-Project

 

From Jim Black,

This project went pretty well. I used pine for the 1X2s and 5/4 cedar decking boards for the shelves rather than the 1X3s. I also extended the lower shelf to the full depth of the frame. Note that the material list for the 1X3s is incorrect. You only need a single 10′ 1X3 for the shelves if you follow the plans. Obviously you need more (~6′) to extend the shelf as I did. Assembly, with the various angles can be tricky. Take your time.

 

 

From Plans: http://myoutdoorplans.com/furniture/two-tier-plant-stand-plans/

Difficulty Level: easy

Time Required: –

Total Cost: –

 

 

- EXPLORE MORE IDEAS FOR -

You may also like

6×12 Lean to Shed – DIY Project

5 Guitar Stand – DIY Project

Double Chair Bench with Table – DIY Project

10×10 Pergola – DIY Project

DIY 12×16 Hip Roof Pavilion

DIY Halloween Decoration

DIY Wood Outhouse

DIY Double Loveseat Bench with Table

DIY 8×8 Lean to Shed

DIY Large Run in Shed

I've been a designer and a woodworker since I first developed consciousness.

Leave a Comment