5×16 Lean to Shed Plans

This step by step diy project is about 5×16 lean to shed plans. This is a small shed that is ideal for narrow gardens. You will probably like the sturdy 2×4 wall framing and the lean to shaped roof, making it ideal for building it next to the property line. This shed features 8′ double front doors and a lean to roof. Please read the local codes before starting the project and make the necessary modifications to comply with the legal regulations. Take a look over the rest of my woodworking plans, if you want to get more building inspiration.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. See all my Premium Plans HERE.

Projects made from these plans

5×16 Lean to Shed Plans – Free PDF Download

Building-a-5×16-lean-to-shed

Cut & Shopping Lists

• A – 4 pieces of 4×4 lumber – 96″ long SKIDS
• B – 2 pieces of 2×6 lumber – 192″ long, 13 pieces – 57″ long FLOOR FRAME
• C – 2 pieces of 3/4″ plywood – 48″x96″ long, 1 piece – 12″x96″ long, 2 pieces – 12″x48″ long FLOOR
• D – 2 pieces of 2×4 lumber – 53″ long, 1 piece – 60″ long, 5 pieces – 75 1/2″ long 2xSIDE WALL
• E – 2 pieces of 2×4 lumber – 192″ long, 1 piece – 285″ long, 15 pieces – 75 1/2″ long BACK WALL
• E – 2 pieces of 2×4 lumber – 192″ long, 13 pieces – 11 1/4″ long TOP BACK WALL
• F – 2 pieces of 2×4 lumber – 48″ long, 1 piece – 192″ long, 1 piece – 185″ long, 10 pieces – 75 1/2″ long, 2 pieces – 70″ long, 2 pieces of 2×6 lumber – 99″ long FRONT WALL
• G – 4 pieces of T1-11 siding – 48″x95″ long, 2 piece – 48″x80 3/4″ long, 2 pieces – 48″x8 1/2″ long SIDING

• 4 pieces of 4×4 lumber – 8′
• 2 pieces of 2×6 lumber – 16′
• 9 pieces of 2×6 lumber – 10′
• 3 pieces of 3/4″ plywood – 4’x8′
• 7 pieces of 2×4 lumber – 16′
• 44 pieces of 2×4 lumber – 8′
• 7 piece of T1-11 siding – 4’x8′
• 1 piece of 1/2″ plywood – 4’x8′
• 1 5/8″ screws
• 6d nails, 2 1/2″ screws, 3 1/2″ screws
• wood filler , wood glue, stain/paint

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One week

Related

• PART 1: 5×16 Lean to Shed Plans
• PART 2: 5×16 Lean to Shed Roof Plans
• PART 3: 5×16 Lean to Shed Door Plans

How to build a 5×16 lean to shed

Floor-frame-5×16-shed

The first step of the project is to build the floor frame. Cut the components from 2×6 lumber, as shown in the diagram. Place the joists every 16″ on center, for a professional result. Check if the corners are are square, drill pilot holes through the rim joists and insert 3 1/2″ screws.

Fitting the skids – 5×16 lean to

Select the location for the shed and level the surface thoroughly. Remove the vegetation layer and make sure you comply with the local building codes. Fit the skids on the location. Place the floor frame and then use rafter ties to lock the skids to the frame. Align the edges with attention for a professional result.

Floor sheets

Fit the 3/4″ plywood sheets to the floor frame and align the edges with attention. Insert 1 5/8″ screws every 8″ along the joists. Leave no gaps between the sheets for a professional result.

Building the wall frames

Back-wall-frame-for-5×16-shed

Build the back walls of the shed from 2×4 lumber. Drill pilot holes through the plates and insert 3 1/2″ screws into the studs. Align the edges and make sure the corners are square. Alternatively, you could use framing nails and a framing gun. Notice the double studs that are placed at both ends of the wall frame.

Front-wall-frame-5xx16-storage-shed

Continue the project by assembling the front wall frame. Use 2×4 lumber for the front wall frame. Use 2×6 lumber and 1/2″ plywood for the double header. Drill pilot holes through the plates and insert 3 1/2″ screws into the studs. Make sure the corners are square and align the edges flush. You can adjust the size of the door opening to suit your needs.

side-wall-frame–5×16-shed

Build the side walls for the shed using the same techniques described above and the information from the diagram.

Assembling the shed frame – 5×16

Fit the wall frames to the floor of the shed. Align the edges with attention and plumb the walls with a spirit level. Drill pilot holes through the bottom plates and insert 3 1/2″ screws into the floor. Lock the adjacent walls together tightly using 3 1/2″ screws.

Top back wall frame

Use 2×4 lumber for the top back wall frame. Cut the components at the right dimensions and then lay them on a level surface. Drill pilot holes through the plates and insert 3 1/2″ screws into the studs.

Fitting the top back wall frame

Place the wall to the top of the shed frame. Align the edges with attention, drill pilot holes and insert 3 1/2″ screws to lock them into place tightly. Plumb the wall frame with a spirit level.

Fitting the siding sheets

Front wall siding panels – 5×16 shed

Fit the sheets to the front of the shed. As you can see in the diagram, you need to make the cuts so you create the door opening. Use 6d nails every 8″ along the frame, to secure the sheets into place tightly.

Back wall siding sheets – 5×16 lean to

Fit the T1-11 siding panels to the back of the shed. Align the edges with attention and leave no gaps between the sheets. Insert 6-8d nails every 8″ along the framing.

How-to-build-a-5×16-shed

Take a look over PART 2 and PART 3 of the project, so you learn how to build the double doors and the roof. I have lots of other shed projects on the site so I recommend you to browse through all alternatives before starting the building project. See all my shed projects HERE.

5×16 Shed Plans – dimensions

The lean-to design makes it easy to tuck against your house or fence, maximizing your space efficiently. Plus, its straightforward build means you can knock it out quickly, giving you a functional and stylish storage solution that keeps your yard organized and clutter-free.

How to build a 5×16 lean to shed

Building a 5×16 lean-to shed might seem like a small project, but it packs a lot of benefits into a compact space. This shed is perfect for tight spots in your yard, offering just enough room to store your garden tools, bikes, or outdoor gear without taking up too much real estate.

5×16 lean to shed – free plans

Tackling a 5×16 lean-to shed is a budget-friendly and manageable project. You’re looking at a cost of around $1,500 to $2,500, depending on the materials and finishes you choose. In terms of time, this is a project you can knock out in a couple of weekends, especially if you’re working solo. The smaller size and straightforward design make it a quick build, so you’ll have your storage solution up and ready to use in no time.

If you want to get this plan as a PDF file, with 1 full Cut list and Shopping list, check the GET PDF PLANS button bellow.

This woodworking project was about 5×16 lean to shed plans free. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

- EXPLORE MORE IDEAS FOR -