Home Brags DIY Firewood Storage Shed

DIY Firewood Storage Shed

by Ovidiu
1.1K views 1 minutes read

 

This section of our site is dedicated to woodworkers and DIY-ers that have built a project inspired by our outdoor plans and have sent us photos and a few comments about their woodworking endeavor.

We strongly encourage you to send us photos and your feedback regarding the projects on MyOutdoorPlans. Please send us the materials at admin@myoutdoorplans.com or using the contact form.

 

 

DIY Firewood Storage Shed

DIY-Firewood-Storage-Shed

 

From Drew,

I used a Framing Nailer instead of screws and it made this firewood storage shed a very easy project. I used all pressure treated lumber, except for the rafters. I had to add 3 Purlins (10′ 1″ x4″, cut to 99.5″) across the top to accommodate nailing the Ondura corrugated asphalt roofing. All total approx $300 and less than 8 hours.  Does not include nails as we already had boxes for our Framing Nailer. I have very minimal experience but have a step-father who has all the tools.

 

 

From Plans: http://myoutdoorplans.com/shed/firewood-storage-shed-plans/

Difficulty Level: intermediate

Time Required: 1 day

Total Cost: 300 $

 

 

- EXPLORE MORE IDEAS FOR -

You may also like

2 comments

Drew -

Thanks for posting this!

If I had to build this again, I would make the high side the open side. Easier access and you could get away with 1 less 1*6 back wall piece.

Again, my sons and I had great fun building this and are looking through all the plans for our next project(s).

Reply
Julian -

Thank you for sharing the project and for the notes after using the project. Can’t wait to see what you will build next!

Reply

Leave a Comment