Home Indoor Indoor Plant Stand Plans

Indoor Plant Stand Plans

by Ovidiu

 

This step by step diy woodworking project is about indoor plant stand plans. If you want to learn more about building a basic plant stand that could be used both indoor and outdoor, we recommend you to pay attention to the instructions described in the article. Work with good judgement and don’t forget to take a look over the rest of the related plans, as there are many designs and woodworking projects to select from.

Work with attention and don’t forget that a good planning will save you from many issues and it will keep the costs withing the total budget. Invest in high quality materials, such as pine, redwood or cedar. Drill pocket holes before inserting the galvanized screws, to prevent the wood from splitting. Add waterproof glue t the joints, in order to enhance the rigidity of the structure. See all my Premium Plans HERE.

 

 

Projects made from these plans

Add-image

 

 

Indoor Plant Stand Plans

Building a plant stand

Building a plant stand

 

Cut & Shopping Lists

  • A – 4 pieces of 1×2 lumber – 30″ long LEGS
  • B – 4 pieces of 1×2 lumber – 5 1/4″ long SUPPORTS
  • C – 2 pieces of 1×2 – 12″ long SUPPORTS

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One day

Related

 

 

Trim---Facebook-BoxMake sure you follow us on Facebook to be the first that gets our latest plans and for some other exclusive content. Also, follow us on Pinterest to get many ideas for your backyard from all the internet! See how you can Support Us with no extra costs to you. Trim---Facebook-Box-Down

 

 

Building a simple plant stand

Building the supports

Building the supports

The first step of the woodworking project is to build the supports for the flower pots. As you can easily notice in the diagram, we recommend you to build the components out of 1×2 lumber. Mark the cut lines on the pieces of lumber and adjust their sizes with a circular saw.

Drill pocket holes at both ends of the wooden components and lock them together, as described in the diagram. Center the short components to the long ones and insert 1 1/4″ screws.

Attaching the legs

Attaching the legs

The next step of the indoor woodworking project is to attach the legs to the supports, as described in the diagram. Therefore, make sure the corners are square and secure the supports to the legs by using 1 1/4″ screws. Adjust the height of the supports according to your needs. Fit the rest of the legs to the supports.

Indoor plant stand plans

Indoor plant stand plans

One of the last steps of the woodworking project is to take care of the finishing touches. Therefore, fill the pilot holes with wood putty and smooth the surface with 120-grit sandpaper.

Top Tip: If you want to enhance the look of the woodworking project and to protect the stand from decay, we recommend you to cover the components with paint or stain. Place the stand in a proper location and move it whenever necessary.

 

 

This woodworking project was about indoor plant stand plans. If you want to see more outdoor plans, we recommend you to check out the rest of our step by step projects. LIKE us on Facebook and Google + to be the first that gets out latest projects and to help us keep adding free woodworking plans for you.

 

 

EXPLORE MORE IDEAS FOR:

You may also like

2 comments

Kevin -

Thank you for the great article. I have a question. What CAD application did you use to draw the layout? I’d like to draw my own. Thanks.

Reply
Julian -

I use Sketchup.

Reply

Leave a Comment