Doors for a Lean to Shed Plans

Ovidiu 2 GapDice RANDOM PLAN

This step by step diy project is about shed double doors plans. This article is PART 3 of the shed with porch project, where I show you how to build the roofing, the doors and how to take care of the finishing touches. Make sure you also check out the other parts of the project, so you learn how to understand the full building project. Take a look over the rest of my woodworking plans, if you want to get more building inspiration.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day.



Doors for a Lean to Shed Plans




  • L – 2 pieces of 2×6 lumber – 171″ long, 2 pieces – 193 1/4″ long ROOF
  • M – 300 sq ft of tar paper, 300 sq ft of asphalt shingles ROOFING
  • – 2 pieces of 2×4 lumber – 79 1/2″ long,1 piece – 67″ long JAMBS
  • O – 2 pieces of T1-11 – 30″x77″ long, 4 pieces of 2×4 lumber – 30″ long, 4 pieces – 70″ long, 2 pieces – 23″ long DOORS
  • P – 8 pieces of 1×4 lumber – 85″ long, 2 pieces – 36 3/4″ long, 2 pieces – 144 3/4″ long, 2 pieces – 29″ long, 4 pieces – 44 3/4″ long, 2 pieces – 32 3/4″ long, 2 pieces – 194 3/4″ long TRIMS

 One day



Trim---Facebook-BoxMake sure you follow me on Facebook to be the first that gets our latest plans and for some other exclusive content. Also, follow me on Pinterest to get many ideas for your backyard from all the internet! Check out our YouTube channel! See how you can Support  Me with no extra costs to you. Trim---Facebook-Box-Down



Building double shed doors



Attach the 2×4 trims around the door opening. Use 2 1/2″ screws to secure the slats into place tightly.



Cut the door panels from 5/8″ T1-11 siding. Attach the 2×4 trims to the door panels and use 2″ screws and glue to lock the trims into place tightly.



Attach the doors to the opening and hang them into place with hinges and a latch.






Attach 2×6 trims to the roof



Cover the roof of the shed with roofing felt, making sure the strips overlap at least 2″. Secure the tar paper to the plywood sheets with roofing staples. Fit the side drip edges over the roofing felt, while the bottom drip edges should be fit under. Read the instructions labeled on the asphalt shingle packs before installing them into place tightly. Start with the bottom left side of the roof and install them all the way to the top.



Seen from the back, the lean to shed has a really nice appearance. With all the trims set into place you can take care of the finishing touches. Fill the holes with wood putty and smooth the surface with 120-220 grit sandpaper.



Don’t forget to take a look over PART 1 and PART 2 of the shed project, so you learn how to frame the frame and the roof of the lean to shed. I have many more shed plans on the site, so don’t forget to check them as well HERE.



This woodworking project was about double doors plans free. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.




Shed      Furniture      Animals      Kids      Garden      Indoor


  1. Arizona at - Reply

    First of, thank you for the wonderful plans! I am working on this shed now!

    I am curious, though. Your plans don’t note any soffit or vents used anywhere. Do you not use soffit on this shed?

    • Ovidiu at - Reply

      1/4″ plywood for the soffit

Click here to cancel reply.

error: Content is protected !!