Home Shed DIY Double Doors for a 16×24 Shed

DIY Double Doors for a 16×24 Shed

by Ovidiu

 

This step by step diy project is about 16×24 gable shed door plans.This is PART 3 of the gable shed project, where I show you how to build the double doors for the shed and how to attach the decorative trims. Don;t forget to take a look over PART 1 and PART 2 of the project, for full instructions on how to build the 16×24 shed. Take a look over the rest of my woodworking plans, if you want to get more building inspiration.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day. See all my Premium Plans HERE.

 

 

Projects made from these plans

Add-image

 

DIY Double Doors for a 16×24 Shed

Building-a-16x24-shed-gable-roof

Building-a-16×24-shed-gable-roof

 

Cut & Shopping Lists

  • L – 2 pieces of 1×4 lumber – 82 1/2″ long, 1 piece – 39″ long TRIMS
  • M – 2 pieces of 2×4 lumber – 87 1/2″ long, 1 piece – 103″ long JAMB
  • N – 2 pieces of 2×4 lumber – 80 1/2″ long, 2 pieces – 48″ long, 1 piece – 41″ long, 1 piece of T1-11 siding – 48″x87 1/2″ long 2xDOOR
  • O – 4 pieces of 1×4 lumber – 36″ long, 4 pieces – 55″ long TRIMS

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One day

Related

 

 

How to build double shed doors

Front-door-jambs

Front-door-jambs

First of all, you need to build the door jambs for the 16×24 shed. Fit the jambs around the door opening and lock them into place with 2 1/2″ screws. Align the edges flush before inserting the screws for a professional result.

Building-the-doors

Building-the-doors

Build the doors from the T1-11 siding panels that you have cut out in the previous steps. Build the trims for the double doors from 2×4 lumber. Lay the door panels on a level surface and then attach the trims into place tightly. Use glue and 2″ brad nails to lock the trims to the door panels. Align the edges flush and smooth them with attention.

Fitting the double doors

Fitting the double doors

Fit the double doors to the front opening and secure them into place with hinges. Moreover, you need to install a latch so you can lock the doors into place. Install handles so you can open and close the doors easily.

Fitting the door trims

Fitting the door trims

Fit the 1×4 trims around the small door. Use 1 1/4″ nails to secure the trims into place tightly. Align the edges flush and leave no gaps between the trims.

Window trims

Window trims

Fit the 1×4 trims around the windows. Align the edges with attention and insert 2″ brad nails so you can lock the trims into place tightly.

16x24 Shed Plans - Back view

16×24 Shed Plans – Back view

Fill the holes and dents with wood putty and then smooth the surface with 120-220 grit sandpaper. Apply a few coats of paint or stain over the components, so you can enhance the look of the shed. The paint will also protect the components from decay and water damage.

16x24 Shed Plans

16×24 Shed Plans

Don’t forget to take a look over PART 1 and PART 2 to learn how to build the frame for the shed, as well as how to frame the roof. This 16×24 shed requires a significant investment in terms of time and money, so make sure you prepare it appropriately.  If you are looking for a different design, make sure you take a look over all my shed plans HERE.

 

 

This woodworking project was about 16×24 gable shed door plans free. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

 

Previous

 

 

 

EXPLORE MORE IDEAS FOR:

You may also like

4 comments

Eric Lavoie -

I live in Smith’s Falls Ontario Canada I was wondering if you could help me and lead me in the right direction on how much it would cost me to get a blueprint on your 16 by 24 basic shed. My municipality requires it when building over 10 by 10. I would be building this myself with some friends who don’t charge me the costs of a contractor. Thank you for your time

Reply
Ovidiu -

You can get the plans for free: https://myoutdoorplans.com/faq/

Reply
Candi Lynn Gerhart -

Could I keep adding wood to make this longer, say 48′ vs 24′? If so what would be the max length?

Reply
Ovidiu -

Yes you can make this longer.

Reply

Leave a Comment