Home Shed Building Barn Shed Doors Plans

Building Barn Shed Doors Plans

by Ovidiu

 

This step by step diy project is about shed double doors plans. This article is PART 3 of the shed with porch project, where I show you how to build the roofing, the doors and how to take care of the finishing touches. Make sure you also check out the other parts of the project, so you learn how to understand the full building project. Take a look over the rest of my woodworking plans, if you want to get more building inspiration.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day. See all my Premium Plans HERE.

 

 

Building Barn Shed Doors Plans

building-shed-doors

Building-shed-doors

 

Cut & Shopping Lists

  • A – 2 pieces of 3/4″ plywood – 11 1/2″x96 long, 2 pieces – 24″x11 1/2″ long, 3 pieces – 48″x96″ long, 2 pieces – 48″x48″ long, 2 pieces – 24″x96″ long, 1 piece – 11″x26 1/2″ long, 6 pieces – 46″x96″ long, 6 pieces – 11 1/2″x46″ long, 2 pieces – 11 1/2″x13 3/4″ long, 2 pieces – 13 3/4″x96″ long ROOF
  • B – 450 sq ft of tar paper, 450 sq ft of asphalt shingles ROOFING
  • C – 8 pieces of 1×6 lumber – 46 1/2″ long, 2 pieces – 119 3/4″ long, 1 piece – 216 1/2″ long TRIMS
  • D – 2 pieces of 2×4 lumber – 79 1/2″ long, 1 piece – 79″ long DOOR JAMBS
  • E – 2 pieces of T1-11 siding – 36″x79 1/2″ long, 4 pieces of 2×4 lumber – 36″ long, 4 pieces – 72 1/2″ long, 2 pieces – 29″ long, 4 pieces – 44 3/4″ long DOORS
  • F – 2 pieces of 2×4 lumber – 79 1/2″ long, 1 piece – 40″ long JAMBS
  • G – 1 piece of T1-11 siding – 33″x79 1/2″ long, 2 pieces of 2×4 lumber – 33″ long, 2 pieces – 72 1/2″ long, 1 piece – 26″ long DOOR
  • H – 4 pieces of 1×4 lumber – 88″ long, 2 pieces – 95″ long, 2 pieces – 112 3/4″ long TRIMS

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One day

Related

 

 

Trim---Facebook-BoxMake sure you follow me on Facebook to be the first that gets our latest plans and for some other exclusive content. Also, follow me on Pinterest to get many ideas for your backyard from all the internet! Check out our YouTube channel! See how you can Support  Me with no extra costs to you. Trim---Facebook-Box-Down

 

 

How to build barn shed doors plans

fitting-the-roofing-sheets

Fitting-the-roofing-sheets

Attach the 3/4″ plywood sheets to the roof of the barn shed, after cutting them to size. Align the edges flush and then insert 1 5/8″ screws into the rafters, every 8″. Make sure the head of the screws is level with the surface of the roof.

fitting-the-barn-roof-sheets-porch-side

Fitting-the-barn-roof-sheets-porch-side

Fit the plywood sheets to the other side of the barn shed roof.

porch-roof-sheets

Porch-roof-sheets

Fit 3/4″ plywood sheets to the other side of the barn shed roof and to the porch. Align the edges with attention and leave no gaps between the components. Drill pilot holes and insert 1 5/8″ screws to lock the sheets into place tightly.

roof-panel

Roof-panel

Attach this panel to the roof of the barn, as well.

porch-ceiling

Porch-ceiling

Attach 3/4″ plywood sheets to the ceiling of the porch. Cut the sheets to size and lock them into place with 2 1/2″ screws. Leave no gaps between the sheets and insert the screws for a professional result. This is an optional step.

Fitting-the-door-jambs

Fitting-the-door-jambs

Attach 2×4 slats around the door opening. Align the edges flush and insert 2 1/2″ screws so you lock them into place tightly.

door-panel

Door-panel

Start assembling the side door using the panel that you have cut out in the previous step. Smooth the edges with sandpaper.

Door-frame-for-shed

Door-frame-for-shed

Attach 2×4 slats to the door panel. Align everything with attention and secure the trims to the panel with 2″ brad nails and glue.

hanging-the-side-door

Hanging-the-side-door

Fit the door to the opening and secure it into place with a latch and with hinges.

fitting-the-double-door-jambs

Fitting-the-double-door-jambs

Attach the 2×4 jambs around the door opening. Cut the components at the right dimensions and then secure them into place with 2 1/2″ screws or 8d nails.

door-panels

Door-panels

Use 5/8″ T1-11 siding for the doors. Smooth the edges with sandpaper, after cutting the panels to size.

fitting-the-door-trims

Fitting-the-door-trims

Attach the 2×4 trims to the door panels. Align the edges with attention and lock everything together tightly with glue and screws, Make sure the edges are flush for a professional result.

diagonal-braces

Diagonal-braces

Fit the diagonal trims to the double doors, as shown in the diagram.

hanging-the-doors

Hanging-the-doors

Hang the double doors to the front of the barn shed. Use hinges and a latch to lock the doors into place. Make sure you leave an even gaps around the doors.

porch-trim

Porch-trim

Fit a 1×4 trim to the front and back of the shed. Use 4d nails to lock the trims into place tightly.

shed-trims

Shed-trims

Fit the rest of the trims to the corners and to the top of the barn shed. Use 4d nails to lock the trims into place tightly.

fitting-the-troof-rims

Fitting-the-troof-rims

Fit 1×6 trims to the front and back of the roof. Cut the trims to the right angle and size and then secure them into place with nails.

fitting-the-porch-trims

Fitting-the-porch-trims

Fit the rest of the trims to the porch section of the barn. Align the edges flush and lock them into place with 4d nails.

fitting-the-roofing

Fitting-the-roofing

Cover the roof of the carport with roofing felt, making sure the strips overlap at least 2″. Secure the tar paper to the plywood sheets with roofing staples. In addition, cut a large piece for the top ridge. Fit the side drip edges over the roofing felt, while the bottom drip edges should be fit under. Read the instructions labeled on the asphalt shingle packs before installing them into place tightly. Start with the bottom left side of the roof and install them all the way to the top.

10x16-barn-shed-with-porch-plans

10×16-barn-shed-with-porch-plans

Apply a few coats of paint or of stain over the components, so you enhance their look and protect them from decay.

10x16-gambrel-shed-with-porch-plans

10×16-gambrel-shed-with-porch-plans

Don’t forget to take a look over PART 1 and PART 2 of the shed project, so you learn how to frame the frame and the roof of the barn shed. I have many more shed plans on the site, so don’t forget to check them as well HERE.

 

 

This woodworking project was about double doors plans free. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

 

Previous

 

 

 

EXPLORE MORE IDEAS FOR:

You may also like

Leave a Comment