This step by step diy project is about 10×10 shed door and trims plans. This is PART 3 of the garden shed project, where I show you everything you want to know about framing the door and fitting the trims. Take a look over the rest of my woodworking plans, if you want to get more building inspiration. Remember that you need to select the site for the shed with attention and that you have to comply with a few legal regulations.
When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day. See all my Premium Plans HERE.
Projects made from these plans
10×10 Shed Doors Plans
[tabs tab1=”Materials” tab2=”Tools” tab3=”Time” tab4=”Related Plans”] [tab id=1]
- S – 2 pieces of 2×4 lumber – 80″ long, 1 piece – 43″ long JAMBS
- T – 1 piece of T1-11 siding – 36″x80″ long, 2 pieces of 2×4 lumber – 36″ long, 1 piece – 29″ long, 2 pieces – 72″ long long DOOR
- R – 8 pieces of 1×4 lumber – 96″ long, TRIMS
- 6 pieces of 2×4 lumber – 8′
- 10 pieces of 1×4 lumber – 8′
- 1 piece of T1-11 siding – 4’x8′
- shed hinges
- 2 1/2″ screws, 3 1/2″ screws, 1 5/8″ screws
- 4d nails, 16d nails, 6d nails
- wood filler , wood glue, stain/paint
[/tab] [tab id=2]
[/tab] [tab id=3]
Building a door for a 10×10 hip roof
First of all, you need to build the door jambs. Cut the jambs from 2×4 lumber and attach them around the opening. Make sure the edges are flush, drill pilot holes and insert 2 1/2″ screws.
Build the door panels from T1-11 siding and the trims from 2×4 lumber. Assemble the door frame with pocket screws. Align the trims flush with the door panels and secure them together with glue and 1 5/8″ screws.
Fit the door to the front opening and secure them to the jambs with hinges. Also install a latch to secure the front door tightly. Check of the doors open and close properly, before you continue the project.
Attach the 1×4 trims to the garden square shed. Align the edges with attention and insert 2″ brad nails to secure them tightly into place. Fill the holes with wood putty and smooth the surface with 120-220 grit sandpaper. Apply a few coats of paint to enhance the look of the shed and to protect the components from decay.
Fit the window to the opening and then install the decorative 1×4 trims. Use 2″ nails to secure the trims into place tightly.
I hope you enjoyed my tutorial on how to build a 10×10 hip shed. This shed is super easy to build and it is also beautiful, so you can add some charm to your garden. Make sure you check out all my woodworking plans HERE.
This woodworking project was about 10×10 shed door and trims plans. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.