Home Shed ATV Shed Ramp Plans

ATV Shed Ramp Plans

by Ovidiu

 

This step by step diy project is about 12×16 ATV shed ramp plans. After building the 12×16 atv shed. you need to make the ramp so you get a super easy access with your vehicles. You need to make a few adjustments so the plans suit your needs. In addition, if you will use heavy vehicles, make sure you use 2x6s instea of 1×6 for your ramp. Take a look over the rest of my woodworking plans, if you want to get more building inspiration.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day. See all my Premium Plans HERE.

 

 

ATV Shed Ramp Plans

building-a-shed-ramp

building-a-shed-ramp

 

Cut & Shopping Lists

  • A – 4 pieces of 2×6 lumber – 35 1/4″ long SUPPORTS
  • B – 1 piece of 2×4 lumber – 96″ long SUPPORT
  • C – 7 pieces of 2×6 lumber – 96″ long RAMP

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One day

Related

 

 

Trim---Facebook-BoxMake sure you follow me on Facebook to be the first that gets our latest plans and for some other exclusive content. Also, follow me on Pinterest to get many ideas for your backyard from all the internet! Check out our YouTube channel! See how you can Support  Me with no extra costs to you. Trim---Facebook-Box-Down

 

 

Building a shed ramp

Building-the-supports

Building-the-supports

Build the supports for the shed ramp from 2×6 lumber. Mark the cut lines on the beams and get the job done with a circular saw. You need to make adjustments according to the height difference between the ground and the floor.

fitting-the-supports

Fitting-the-supports

Fit the supports to the front of the shed. Use metal hardware to secure the joists into place.

fitting-the-ramp-joists

Fitting-the-ramp-joists

Lock all the supports together by fitting the 2×4 support.

fitting-the-ramp-slats

Fitting-the-ramp-slats

Last but not least, install the 1×6 slats to the supports. Leave no gaps between the slats and then secure them to the supports with 1 1/4″ screws. Drill pilot holes to prevent the wood from splitting.

atv-shed-plans

ATV-shed-plans

Check out the rest of the project, so you learn how to assemble the frame of the shed, as well as the roof.

diy-atv-shed

DIY-atv-shed

This atv shed is really nice, as it gives you the opportunity to store lots of large items inside starting with a motorbike up to an ATV. Check out PART 1 and 2 of the project to learn more on how to build the shed frame and roof.

 

 

This woodworking project was about atv shed ramp plans free. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

 

Previous

 

 

 

EXPLORE MORE IDEAS FOR:

You may also like

Leave a Comment