Home Shed 8×8 Saltbox Shed Roof Plans

8×8 Saltbox Shed Roof Plans

by Ovidiu

 

This step by step diy project is about 8×8 saltbox shed roof plans. This is PART 2 of the small storage shed, where I show you how to build the saltbox style roof. This shed has a sturdy structure, but I strongly recommend you to read and comply with the local building codes. This covers the build of the roof and of the front door. Take a look over the rest of my woodworking plans, if you want to get more building inspiration.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day. See all my Premium Plans HERE.

 

 

Projects made from these plans

Add-image

 

 

8×8 Saltbox Shed Roof Plans

Building a 8x8 saltbox shed

Building a 8×8 saltbox shed

 

Cut & Shopping Lists

  • G – 2 pieces of T1-11 siding – 48″x32 1/4″ long, 2 pieces – 48″x46 1/4″ long ROOF END PANELS
  • H – 2 pieces of 2×4 lumber – 36 1/8″ long, 1 piece of 2×6 lumber – 96″ long RIDGE BEAMS
  • I – 7 pieces of 2×4 lumber – 96″ long, 7 pieces – 42″ long RAFTERS
  • J – 2 pieces of 2×4 lumber – 96″ long, 2 pieces – 42″ long, 9 pieces – 4 1/2″ long 2xOVERHANG
  • K – 2 pieces of 3/4″ plywood – 8″x94 1/4″ long, 2 pieces – 8″x39 1/4″ long, 1 piece – 48″x96″ long, 1 piece – 4, 1 piece – 46″x96″ long, 1 piece – 39 1/4″x96″ long ROOF SHEETS
  • L – 2 pieces of 1×6 lumber – 97″ long, 2 piece – 43 1/2″ long, 2 pieces – 113 1/2″ long ROOF TRIMS
  • M – 120 sq ft of tar paper, 120 sq ft of asphalt shingles ROOFING
  • M – 2 pieces of 2×4 lumber – 80″ long, 1 piece – 79″ long JAMBS
  • N – 2 pieces of 2×4 lumber – 73″ long, 2 pieces – 36″ long, 1 piece – 29″ long, 1 piece T1-11 siding – 36″x80″ long DOOR
  • O – 2 pieces of 1×4 lumber – 24″ long, 2 pieces – 31″ long, 4 pieces – 96″ long, 4 pieces – 72″ long TRIMS

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One week

Related

 

 

8×8 Saltbox Shed Roof Plan

Rafters nr 1

Rafters nr 1

The first step of the project is to build the 2×4 rafters for the garden saltbox shed. Use a miter saw and make 30 degree cuts to one end of the beams. Notice the birdsmouth cut to the rafters, so you can fit them to the ridge beam and to the top plates.

front-rafters---8x8-saltbox-shed

front-rafters—8×8-saltbox-shed

Next, you need to make the 35 degree cuts to the shorter rafters. Use 2×4 lumber for these rafters, as well.

Fitting the ridge beam - 8x8 shed

Fitting the ridge beam – 8×8 shed

Continue the project by fitting the ridge beam to the top of the shed walls. Cut the supports from 2×4 lumber and the top ridge from 2×6 lumber. Drill pocket holes at both ends of the supports and secure them to the side top plates with 2 1/2″ screws. Make sure the corners are square and plumb the supports with a spirit level. Attach the 2×6 ridge beam and insert the 2 1/2″ screws to lock it into place.

Fitting the rafters

Fitting the rafters

Fit the rafters to the top of the shed, every 16″ on center, as shown in the plans. Use rafter ties to secure the rafters into place tightly.

Saltbox side supports

Saltbox side supports

Cut and fit the 2×4 supports to the sides of the shed, so you can fit the siding panels.

Side Top panels

Side Top panels

Cut the T1-11 sheets for the roof side ends and then secure them to the supports with 6-8d nails, every 8″ along the framing.

Assembling the overhangs

Assembling the overhangs

Assemble the overhangs for the front and back of the shed. Drill pilot holes through the rafters and insert 3 1/2″ screws into the blockings.

Fitting the side overhangs

Fitting the side overhangs

Fit the overhangs to the sides of the shed. Align the edges flush, drill pilot holes and insert 3 1/2″ screws to lock them into place tightly.

Roof sheets 1

Roof sheets 1

Fit the 1/2″ plywood sheets to the roof of the shed. Align the edges flush and leave no gaps between the components. Drill pilot holes and insert 1 5/8″ screws every 8″ along the rafters to lock the sheets into place tightly.

Fitting the roof sheets 1

Fitting the roof sheets 1

Fit the roofing sheets to the opposite side of the shed roof, as shown in the diagram. Leave no gaps between the sheets and then insert 1 5/8″ screws every 8″ along the framing.

Side roof trims

Side roof trims

Cut the 1×6 trims for the sides of the shed. Use a miter saw to make the angle cut to one end of the trims and then secure them into place with 2″ nails.

Fitting the roof trims to the front and back of the shed

Fitting the roof trims to the front and back of the shed

Attach the 1×6 trims to the sides of the shed roof. Align the edges flush and secure the trims into place with 2″ nails. Fit the 1×6 trims to the front and back of the shed. Align the edges flush and insert 2″ nails to lock them to the rafters.

Fitting the roofing

Fitting the roofing

Cover the roof of the shed with roofing felt, making sure the strips overlap at least 2″. Secure the tar paper to the plywood sheets with roofing staples. In addition, cut a 12″ piece for the top ridge. Fit the side drip edges over the roofing felt, while the bottom drip edges should be fit under.

 

Building the shed door

Door jambs

Door jambs

Fit the 2×4 jambs around the 3′ door opening. Align the edges flush and insert 2 1/2″ screws to lock them into place tightly.

Door-for-8x8-saltbox-shed

Door-for-8×8-saltbox-shed

Use 5/8″ T1-11 siding sheets for the door panel and 2×4 lumber for the door frames. Use pocket holes and 2 1/2″ screws to assemble the door frame, then attach the panel into place. Use 2″ nails to secure the panel to the door frame. Use the panel that you cut out from the wall siding, to make the door.

Fitting the door

Fitting the door

Fit the door to the opening, as shown in the diagram. Attach the door to the jambs with hinges. Install a latch to keep the doors shut.

Window trims - 8x8 saltbox shed

Window trims – 8×8 saltbox shed

Fit the window to the opening and then attach the 1×4 trims, to enhance the look of the shed project.

Fitting the corner trims to the shed

Fitting the corner trims to the shed

This small storage shed will easily blend in with other constructions in your backyard. You can also take a look over the rest of my shed projects for more inspiration. See all my shed plans HERE.

8x12 saltbox shed - front view

8×12 saltbox shed – front view

Make sure you check out the rest of the project, so you learn how to frame the 8×8 garden shed. In addition, I have lots of other shed projects on the site so I recommend you to browse through all alternatives before starting the building project. I have tons of free woodworking projects on the blog, so make sure you see the full list HERE.

 

 

This woodworking project was about 8×8 gable shed roof plans free. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

 

Previous

 

 

 

EXPLORE MORE IDEAS FOR:

You may also like

Leave a Comment