8×14 Shed Doors Plans

This step by step diy project is about 8×14 shed doors and trims plans. This is PART 3 of the small garden shed project, where I show you how to build the double doors for the storage shed and how to fit the decorative trims. The double doors will allow and easy access to the interior of the shed. Take a look over the rest of my woodworking plans, if you want to get more building inspiration.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in a few day. See all my Premium Plans HERE.



Projects made from these plans




8×14 Shed Doors Plans




[tabs tab1=”Materials” tab2=”Tools” tab3=”Time” tab4=”Related Plans”] [tab id=1]

  • – 2 pieces of 2×4 lumber – 85 1/2″ long, 1 piece – 79″ long 2xJAMBS
  • N – 2 pieces of 2×4 lumber – 76 1/4″ long, 2 pieces – 36″ long, 1 piece of T1-11 siding – 36″x83 1/4″ long 4xDOOR
  • O – 4 pieces of 1×4 lumber – 92 1/4″ long, 4 pieces – 93 1/2″ long TRIMS

  • 9 pieces of 2×4 lumber – 8′
  • 8 pieces of 1×4 lumber – 8′
  • 2 1/2″ screws, 3 1/2″ screws, 1 5/8″ screws, 1 1/4″ screws
  • 6d nails
  • hinges+latch
  • wood filler , wood glue, stain/paint

[/tab] [tab id=2]

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

[/tab] [tab id=3]

 One day

[/tab][tab id=4]




Building shed doors



Fit the 2×4 jambs around the front door opening. Align the edges with attention, drill pilot holes and insert 2 1/2″ screws, every 8″ along the framing.



Build the door panels from T1-11 siding and the trims from 2×4 lumber. Use 1 5/8 screws to lock the panels to the trims. Add glue to the joints and align the edges flush. The door panels are the pieces you have cut out when installing the sheets to the front wall.

Fitting the doors

Fitting the doors

Fit the double doors to the side of the shed. Align the edges with attention and use hinges to lock them to the jambs. Make sure the doors open and close easily and then install the latch.


Side wall trims

Side wall trims

Fit the 1×4 trims to the sides of the shed. Align the edges with attention and insert 2″ nails to lock the trims into place tightly.

Front and back trims

Front and back trims

Fit the trims to the front of the shed and back, as well.

8x14 Shed Plans

8×14 Shed Plans

Last but not least, you need take care of the finishing touches. Fill the holes with wood putty and then smooth the surface with 120-220 grit sandpaper. Apply a few coats of paint or stain to the components, so you can protect them from decay and so you can enhance the look of the shelter. Check out PART 1 and PART 2 of the shed, so you can learn everything you need to know about building the floor, walls and roof for the shed.



This woodworking project was about shed doors plans. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.




Leave a Reply

error: Content is protected !!