This step by step diy project is about free 8×12 shed plans. I have designed this garden shed, so you can store all your garden tools including that lawn mower. The large double doors placed at the front of the shed and the side windows, make it perfect for almost any backyard. Take a look over the rest of my woodworking plans, if you want to get more building inspiration. Remember that you need to select the site for the shed with attention and that you have to comply with a few legal regulations. Premium Plans for this project available in the Shop.
You should remember that all my woodworking plans come with 3D diagrams, step by step instructions and complete Cut and Shopping lists. Inn addition, you can Print or PDF download the plans for free, so you can take the plans with you in the shop. I did my job, now it is your turn to build amazing pieces of furniture!
When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day.
Projects made from these plans
8×12 Shed Plans
Cut + Shopping Lists
- A – 3 pieces of 4×4 lumber – 144″ long SKIDS
- B – 2 pieces of 2×6 lumber – 144″ long, 10 pieces – 93″ long FRAME
- C – 3 pieces of 3/4″ plywood – 48″x96″ long FLOOR
- D – 2 pieces of 2×4 lumber – 8 1/2″ long, 1 piece – 89″ long, 1 piece – 96″ long, 6 pieces – 78 1/2″ long FRONT WALL
- E – 2 pieces of 2×4 lumber – 89″ long, 1 piece – 96″ long, 5 pieces – 78 1/2″ long BACK WALL
- F – 2 pieces of 2×4 lumber – 144″ long, 1 piece – 137″ long, 10 pieces – 78 1/2″ long, 2 pieces – 36″ long, 3 pieces – 31 1/2″ long, 4 pieces of 2×6 lumber – 39″ long 2xSIDE WALL
- G – 4 pieces of T1-11 siding – 48″x81 1/2″ long, 6 pieces – 48″x83″ long SIDING
- 3 pieces of 4×4 lumber – 12′
- 2 pieces of 2×6 lumber – 12′
- 10 pieces of 2×6 lumber – 8′
- 6 pieces of 2×4 lumber – 12′
- 6 pieces of 2×4 lumber – 8′
- 37 pieces of 2×4 lumber – 8′
- 3 pieces of 3/4″ plywood – 48″x96″
- 10 pieces of T1-11 5/8″ siding – 4’x8′
- 2 1/2″ screws, 3 1/2″ screws, 1 5/8″ screws
- 6d nails, ties
- wood filler , wood glue, stain/paint
Step 1: How to build the floor for 8×12 shed
The first step of the project is to build the floor frame. Cut all the joists from 2×6 lumber and then lay them on a level surface. Make sure you place the joists every 16″ on center, for a professional result. Drill pilot holes through the rim joists and insert 3 1/2″ screws into the perpendicular joists. Make sure the corners are square for a professional result.
Select the location for the shed and then level it properly. Compact a layer of gravel to the location and the lay the 4×4 skids. Fit the floor frame to the skids and then use rafter ties to connect them tightly.
Lay the 3/4″ plywood sheets to the floor frame and align the edges flush. Drill pilot holes every 8″ along the framing and insert 1 5/8″ screws. Leave no gaps between the sheets for a professional result.
Step 2: Building the wall frames
Build the side wall frames for the 8×12 shed using 2×4 lumber. Drill pilot holes through the plates and insert 3 1/2″ screws into the studs. As you can easily notice in the diagram, you need to place double studs to both ends of the walls. Make sure the corners are square and align the edges flush.
Moreover, you need to frame 3’x3′ to the side walls. You can adjust the size of the wall frames to suit your needs.
Build the front wall for the shed from 2×4 lumber, as well. Drill pilot holes through the plates and insert 3 1/2″ screws into the studs. Fit the double plate to the top of the wall and secure it into place with 2 1/2″ screws. You can adjust the size of the door opening to suit your needs.
Build the back wall from 2×4 lumber, using the same techniques described above. Place the studs every 24″ on center and then make sure the corners are square.
Fit the wall frames to the floor of the shed. Align the edges flush and plumb them vertically with a spirit level. Drill pilot holes through the bottom plates and insert 3 1/2″ screws into the floor.
Step 3: Fitting the siding walls
Fit the T1-11 siding sheets to the sides of the shed. Align the edges flush and lock them into place tightly with 6-8d nails. Insert the nails every 8″ along the framing and leave no gaps between the sheets. Cut out the window opening and smooth the edges with sandpaper.
Fit the panels to the front wall, as well. Make cuts to the sheets so you can fit them around the double door opening. Use 6-8d nails to secure the sheets to the framing. As you can notice in the diagram, you need to inset the sheets 1 1/2″ screws from the top plate.
Fit the sheets to the back of the shed, making sure you inset them 1 1/2″ from the top plate.
Make sure you check out PART 2 of the project, where I show you how to build the roof for the shed. Take a look over PART 3 of the project, where I show you how to build the double door and how to fit the trims.
This 8×12 shed with a gable roof is a good choice if you want to combine the storage space wit the easy accessibility and with the looks. This shed can add a lot of value to the property with a small investment. The return is awesome, especially if you build it by yourself! Premium Plans for this project available in the Shop.
This woodworking project was about 8×12 shed plans free. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.