This step by step diy project is about 6×4 shed roof plans. This is PART 3 of the sturdy 6×4 storage shed, where I show you how to build the double front doors. Make sure you check out the first and second part of the project, so you learn how to build the frame of the shed, as well as the roof. You can easily adjust the size and the design of the doors, to suit your needs. Take a look over the rest of my woodworking plans, if you want to get more building inspiration.
When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day. See all my Premium Plans HERE.
Projects made from these plans
6×4 Double Shed Door Plans
[tabs tab1=”Materials” tab2=”Tools” tab3=”Time” tab4=”Related Plans”] [tab id=1]
- N – 2 pieces of 1×4 lumber – 81 1/2″ long, 1 piece – 55″ long JAMBS
- N – 2 pieces of 21×4 lumber – 70 3/4″ long, 2 pieces – 24″ long, 1 piece – 16″ long, 1 piece of T1-11 – 24″x77 3/4″ long 2xDOOR
- M – 8 pieces of 1×4 lumber – 89″ long TRIMS
- 17 pieces of 1×4 lumber – 8′
- door hinges and latch
- 8d nails, 2 1/2″ screws, 1 1/4″ screws
- wood filler , wood glue, stain/paint
- shed accessories
[/tab] [tab id=2]
Hammer, Tape measure, Framing square, Level
Miter saw, Drill machinery, Screwdriver, Sander
[/tab] [tab id=3]
- PART 1: 6×4 Gable Shed Plans
- PART 2: 6×4 Gable Shed Roof Plans
- PART 3: 6×4 Gable Shed Door and Trims Plans
Building double shed doors
Fit 1×4 jambs around the door opening. Cut the components at the right dimensions and secure the jambs into place with 2 1/2″ screws. Align the edges flush.
Continue the project by assembling the double shed doors. Cut the frame of the 1×4 lumber at the right dimensions and lock them into place with 1 1/4″ screws and construction glue. Align the edges flush and make sure the corners are square. Attach the T1-11 siding sheets with 2″ nails, every 8″ along the framing. The siding panels are the ones you cut out in the previous steps.
Fit the double shed doors to the opening and lock them to the jambs with hinges. In addition, install a latch to keep the doors shut.
Fit the 1×4 trims to the sides of the shed. Align the edges with attention and insert 2″ nails to secure the trims into place tightly.
Make sure you check out the rest of the project, so you learn how to frame the 12×16 garden shed and how to build the gable roof. See PART 1 and PART 2. In addition, I have lots of other shed projects on the site so I recommend you to browse through all alternatives before starting the building project.
This woodworking project was about 6×4 double shed door plans free. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.