Home 4x6 4×6 Shed Plans

4×6 Shed Plans

by Ovidiu

 

This step by step diy project is about 4×6 shed plans. This is PART 1 of the shed project where I show you how to build the floor and the walls for the small garden shed. If you want to create additional storage space for your garden, take a look over my plans and check out PART 2, as well. You can easily adjust the size of the overhangs.  Take a look over the rest of my woodworking plans, if you want to get more building inspiration.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day. See all my Premium Plans HERE.

 

 

Projects made from these plans

Add-image

 

 

4×6 Shed Plans

Building-a-4x6-storage-shed

Building-a-4×6-storage-shed

 

Cut & Shopping Lists

  • A – 2 pieces of 2×6 lumber – 72″ long, 7 pieces – 45″ long FRAME
  • B – 2 pieces of 4×4 lumber – 72″ long SKIDS
  • C – 1 piece of 3/4″ plywood – 48″x72″ long FLOOR
  • D – 2 piece of 2×4 lumber – 65″ long, 4 pieces – 80″ long 2xSIDE WALLS
  • E – 2 pieces of 2×4 lumber – 48″ long, 6 pieces- 80″ long BACK WALL
  • F – 6 pieces of 2×4 lumber – ” 80″ long, 1 piece – 48″ long, 2 pieces – 36″ long, 2 pieces – 6″ long FRONT WALL
  • G – 4 pieces of 1/2″ plywood – 48″x84″ long, 2 pieces – 24″x84″ long SIDING

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One day

Related

 

 

Trim---Facebook-BoxMake sure you follow me on Facebook to be the first that gets our latest plans and for some other exclusive content. Also, follow me on Pinterest to get many ideas for your backyard from all the internet! Check out my YouTube channel! See how you can Support MOP  with no extra costs to you. Trim---Facebook-Box-Down

 

 

Building a 4×6 Gable Shed

Building-the-floor-frame

Building-the-floor-frame

The first step of the project is to build the floor for the 4×6 shed from 2×6 lumber. Cut the components at the right dimensions shown in the plans. Dill pilot holes through the 72″ long slats and insert 2 1/2″ screws into the perpendicular joists. Make sure the corners are square and align the edges flush before inserting the screws.

Attaching the floor

Attaching the floor

Attach the floor to the joists. Cut the floor at 48″x72″ from 3/4″ plywood and attach it to the frame. Align the edges with attention and leave no gaps between the components. Drill pilot holes and secure the floor to the joints with 1 5/8″ screws. Insert the screws every 8″ along the joists.

Fitting the skids

Fitting the skids

Turn the floor frame upside down and attach the 4×4 skids, as shown in the diagram. Drill pilot holes and secure the skids to the joists using 4 1/2″ screws.

Building-the-side-walls

Building-the-side-walls

Next, you need to build the walls for the 4×6 shed. Start with the side walls. Cut the components from 2×4 lumber at the dimensions shown in the diagram. Drill pilot holes through the plates and insert 2 1/2″ screws into the studs. Align the edges and make sure the corners are right-angled.

Building-the-back-wall-frame

Building-the-back-wall-frame

Continue the project by assembling the back wall for the gable roof shed. As you can easily notice in the diagram, you need to double the studs placed at both ends of the wall. Assemble the back wall with 2 1/2″ screws.

Building-the-front-wall-frame

Building-the-front-wall-frame

Assemble the front wall for the 4×6 shed using the information from the diagram. As you can notice in the plans, you have to install a double header to the top of the wall. Fit a piece of 1/2″ plywood between the 2×4 headers before installing it into place.

Assembling the shed frame

Assembling the shed frame

Lift the walls and lay them to the floor of the shed, as shown in the plans. Align the edges with attention, drill pilot holes through the bottom plates and insert 3″ screws into the floor frame. Use a spirit level to make sure the walls are plumb before inserting the screws. In addition, lock the adjacent walls together with 2 1/2″ screws.

Building the front wall

Building the front wall

Use 5/8″ siding or 1/2″ plywood for the exterior walls. As you can see in the image, you need to cut out the door opening from the front wall. Align the edges with attention and secure the panel to the framing using 1 1/2″ brad nails.

Fitting the side and back walls

Fitting the side and back walls

Fit the panels to the sides and to the back of the shed, as well. Align the edges of the panels before securing them into place with brad nails.

4x6 Shed Plans

4×6 Shed Plans

This small shed is ideal for staring tools or other small items in your yard. Don’t forget to take a look over PART 2 of the project, so you learn how to build the roof and the front door for the shed. If you build these, I would love to see your project.

 

 

This woodworking project was about 4×6 shed plans. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

 

Next

 

 

 

EXPLORE MORE IDEAS FOR:

You may also like

2 comments

Robert Bauman -

I want to build a 4×6 shed to contain my water pump and pressure tank, as well as having a bit of storage for my garden tools.

Is it possible to purchase the 4×6 shed plans that I see here?

I’m VERY good at following directions and I’m pretty good with a chop saw, so I’d like to give it a go.

It would be anchored with J-bolts to concrete, so I don’t need the skid. It would be placed near the manufactured home I have, so I would like to change the roof design to a “shed roof” so that rain will fall away from the home and the shed and that the shed roof design complements that of the home. The “shed roof” would be 4×6 and parallel to the long side of the shed. The door would be on the 4-foot end.

Please don’t hesitate to contact me at ******* if any of the above is unclear.

Thanks,

Bob Bauman

Reply
Ovidiu -

I don’t do custom plans.

Reply

Leave a Comment