Home Shed 12×8 8×8 Shed Doors Plans

12×8 8×8 Shed Doors Plans

by Ovidiu
629 views 4 minutes read

 

This step by step diy project is about 12×8 8×8 shed doors and trims plans. This is PART 3 of the lean to shed project, where I show you how to build the double doors for the storage shed and how to fit the decorative trims. The double front doors will allow and easy access to the interior of the shed. Take a look over the rest of my woodworking plans, if you want to get more building inspiration.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in a few day. See all my Premium Plans HERE.

 

 

Projects made from these plans

Add-image

 

 

12×8 8×8 Shed Doors Plans

Building-a-12x8-8x8-shed-gable-roof

Building-a-12×8-8×8-shed-gable-roof

 

Cut & Shopping Lists

  • N – 2 pieces of 2×4 lumber – 80″ long, 1 piece – 79″ long JAMBS
  • O – 2 pieces of 2×4 lumber – 73″ long, 2 pieces – 36″ long, 1 piece – 29″ long, 1 piece of T1-11 siding – 36″x80″ long DOOR
  • P – 2 pieces of 2×4 lumber – 80″ long, 1 piece – 39″ long JAMBS
  • R – 2 pieces of 2×4 lumber – 73″ long, 2 pieces – 32″ long, 1 piece – 25″ long, 1 piece of T1-11 siding – 32″x80″ long 2xDOOR
  • Q – 7 pieces of 1×4 lumber – 94″ long, 3 pieces – 93 1/2″ long TRIMS

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One day

Related

 

 

Building 12×8 8×8 shed doors

Double door jambs

Double door jambs

Fit the 2×4 jambs around the double door opening. Align the edges with attention, drill pilot holes and insert 2 1/2″ screws, every 8″ along the framing.

Building-the-side-double-doors

Building-the-side-double-doors

Build the door panel from T1-11 siding and the trims from 2×4 lumber. Use 1 5/8 screws to lock the panels to the trims. Add glue to the joints and align the edges flush.

Fitting the double doors

Fitting the double doors

Fit the doors to the large shed. Align the edges with attention and use hinges to lock them to the jambs. Make sure the doors open and close easily and then install the latch to lock them tightly.

Front door jambs

Front door jambs

Fit the 2×4 jambs around the small shed door opening. Align the edges with attention and insert 2 1/2″ screws, every 8″ along the framing.

Front-door

Front-door

Build the door panel from T1-11 siding and the trims from 2×4 lumber. Use 1 5/8 screws to lock the panels to the trims. Add glue to the joints and align the edges flush.

Fitting the front door

Fitting the front door

Fit the double doors to the opening and align the edges with attention. Use hinges to lock the doors to the jambs with hinges. Fit a latch to lock the doors together tightly.

Side wall trims

Side wall trims

Use 1×4 lumber for the side wall trims. Make the angle cuts with a miter saw and then lock them into place with 2″ brad nails.

Front wall trims

Front wall trims

Fit the decorative trims to the front and back of the shed, as well. Fit the window into place and then fit decorative trims to hide the seams.

12x8 8x8 shed plans

12×8 8×8 shed plans

Last but not least, you need take care of the finishing touches. Fill the holes with wood putty and then smooth the surface with 120-220 grit sandpaper. Apply a few coats of paint or stain to the components, so you can protect them from decay and so you can enhance the look of the shelter. Check out PART 1 and PART 2 of the shed, so you can learn everything you need to know about building the floor, walls and roof for the shed.

 

 

This woodworking project was about 12×8 8×8 shed doors plans. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

 

Previous

 

 

- EXPLORE MORE IDEAS FOR -

You may also like

Leave a Comment